Home Server - Case Swap Revisit
Loading...
Loading...
5:19
Home Server Case Swapby wowtorreon264 views- 4:10
Craigslist Computer Finds 9-28-2011by wowtorreon402 views
- 1:09
Status display for my home serverby sk7ca535 views
- 5:11
Windows Home Server 2011 Build In A Rackmount Case Time Lapse Buildby scooter99tube4,520 views
- 4:38
My Home Network Setupby LinuxAllOver1,718 views
- 8:11
Rosewill RSV-R4000 Unboxingby wowtorreon447 views
- 3:46
iStarUSA D-4-B350PL-Blue Server Caseby NeweggFans2,977 views
- 10:43
Custom Server Build Part 2by SUPERMONJ310 views
- 5:06
My home serverby Guru0101013,763 views
- 2:53
Super-cheap Home Serverby mrsmegz6,601 views
- 8:52
Norco RPC-250 2U Rackmount Server Case Overview.mp4by scooter99tube944 views
- 3:19
Basement Workbench and Upcoming Project Announcementby wowtorreon598 views
- 3:44
Server Room 3.0by HardTrancid497 views
- 2:57
Adding a Hard Drive to a Windows Home Serverby alwaysmc2509 views
- 2:20
Love My Home Serverby rgriffin121,125 views
- 2:27
Linux Server Setup Case Modificationby tb4gwell290 views
- 2:02
Home Network + New Home Made server rack!by Jamac6665,508 views
- 5:42
Home server setup part 1by smokey65662227 views
- 5:25
How to build a Home Media Server - Tech Sh*tby TechSht0136,402 views
- 7:04
Revise home server and network setup "Part one"by RetroPCDOS1,539 views
I got the close to the same case with the same problem (Rosewill RSV-L4000). and what I did was move the Main bars backward in my network rack so the handles dont have any problems with hitting the door
RKBET 1 month ago
@RKBET Cool, I need to do some upgrade work on my server. I'll give that a try. Thanks for the suggestion!
wowtorreon 1 month ago
Can't you just use the screws from the handles without actually putting the handles on. I'm sure you could find spacers or washers if you need something in between the two.
bennyzee 5 months ago
@bennyzee That's exactly what I did - I took the handles off and just used the brackets. I noticed though that on the front of the rack (where you would screw the case to the rack rails) that the holes didn't line up exactly - they are too narrow. The handles added some width so right now I just screwed in one side. I'll eventually get around to adding some washers or something to widen it up.
wowtorreon 5 months ago