Honda Accord 1997 Halo Lights Wiring

It took me a long time but I was finally able to wire up the Angel Eyes/Halo Ring Lights on my Halo Projector lights.

Spec-D Tuning Halo Lights for 1997 Honda Accord LX

Get About:

8 to 10 Female Crimp Connectors
8 to 10 Male Crimp Connectors
6 to 8 Black Wires (differentiating for Ground Wire)
6 to 8 Red Wires (I used white wires, I would use red to match the existing harness wires on the car)
8 to 10 Quick Connectors

How to:
1) Strip and Crimp the black and white/red wires on the Halo Lights with the Male Crimp Connector and use electric tape to cover the bottom part of the crimp connector (I just crimp the wires that are the Halo Ring lights and the side head lights. I didn't use the Fog light wires)
2) Get a black wire and a white/red wire and strip and crimp the the wire with Female Crimp Connectors and use the electric tape to cover the bottom part of the crimp connector.
3) Hold the headlight matching whichever side you are working on. For the LEFT HEADLIGHT, the MIDDLE RIGHT LIGHT is the regular light. The MIDDLE LEFT LIGHT is the Hi-beam light. Connect the Headlight black wire to the black wire on the regular light harness wire with the Quick Connector. Connect the headlight white/red wire to the red wire on the regular light harness wire with the Quick Connector.
4) Do the same steps for the side light wires

Category:

Howto & Style

Tags:

• Honda
• Accord
• 1997
• Halo
• Lights
• Angel
• Eyes
• Spec-D
• Tuning
• Wire
• Wiring
• Harness
• Quick
• Connectors
• Crimp