Hey there bob you need to look into centrifuge this way old school way of filtering. Everyone look at pabiodiesel supply thay guy has the best prices on centrifuges the only way to go for filtering oil. You can even filter motor oil as well.
@teel6060 US Filtermaxx centrifuges are factory made with high precision commercial machines, NOT "home made". I think USFiltermaxx offered some insight to oil cleaning here. He pointed out problems with settling and filtering in direct response to the video and gave the solution. The message was unique and sincere. That's not spamming. It's helpful. If you don't have enough money for a centrifuge, then that's a different problem.
Furthermore, if the long-period settling worked as well as a centrifuge, then you wouldn't need those filters. If you do need the filters then that means you still have particles larger than about 10 microns, which means the oil has not been cleaned well enough. The most damaging particulates are about 4 microns or less, which that filter will never remove. I build and sell high quality centrifuges that remove sub-micron particulates. Check out my videos.
That's how it should be done if you don't have a centrifuge. However, it gets to be a hassle and it takes too long. With a good centrifuge, you could clean all that oil (you have quite a bit) to a higher standard in 1 day. I've done the settling thing. You always have that problem of completely separating the last bit of oil from the junk.
I've read of a Bear that attacked a Rabbit and smashed it's hatchback window to eat the plastic fuel tank of WVO. Depending where you are larger animals could be of concern! Keep up the great vids!
Hey there bob you need to look into centrifuge this way old school way of filtering. Everyone look at pabiodiesel supply thay guy has the best prices on centrifuges the only way to go for filtering oil. You can even filter motor oil as well.
77greengiant 1 week ago
if you have much extra oil I would trade you some honey for oil. I run cooking oil my self in truck.
Don
the fatbeeman
fineshooter 1 week ago
Usfiltermaxx
Hamish121212 1 week ago
What do you do with the wast left after removing the "good oil"?
SoEFleX 2 months ago
@teel6060 US Filtermaxx centrifuges are factory made with high precision commercial machines, NOT "home made". I think USFiltermaxx offered some insight to oil cleaning here. He pointed out problems with settling and filtering in direct response to the video and gave the solution. The message was unique and sincere. That's not spamming. It's helpful. If you don't have enough money for a centrifuge, then that's a different problem.
drolex2 3 months ago
USFiltermaxx, please quit spamming all over Youtube. Not interested in your home made high priced centrifuges!
teel6060 4 months ago
Furthermore, if the long-period settling worked as well as a centrifuge, then you wouldn't need those filters. If you do need the filters then that means you still have particles larger than about 10 microns, which means the oil has not been cleaned well enough. The most damaging particulates are about 4 microns or less, which that filter will never remove. I build and sell high quality centrifuges that remove sub-micron particulates. Check out my videos.
USFiltermaxx 4 months ago
That's how it should be done if you don't have a centrifuge. However, it gets to be a hassle and it takes too long. With a good centrifuge, you could clean all that oil (you have quite a bit) to a higher standard in 1 day. I've done the settling thing. You always have that problem of completely separating the last bit of oil from the junk.
USFiltermaxx 4 months ago
I've read of a Bear that attacked a Rabbit and smashed it's hatchback window to eat the plastic fuel tank of WVO. Depending where you are larger animals could be of concern! Keep up the great vids!
notoriouslizw 4 months ago
Mice will also chew a small hole at the top.
MrPhotodoc 6 months ago