Phillips 46pp930217 (3-d warped picture)

I was 90% sure it was convergence chips. So i bought them from www.tvrepairkits.com changed the two IC Chips & the Twelve resistors that came with the kit and this is the picture i get. It's still warped so its in possibel to do the convergence through the menu. Any body could help it would be great.

Category:

Science & Technology

Tags:

• phillips
• 46pp930217
• big screen
• projection
• 46
• convergence
• ic chips
• resistors
• capacitors
• 3-d
• warped
• sodder
• tv
• television

[mikewm9v]

If this is a hitachi chassis good luck trying to tell someone how to put batteries in the remote, let alone replace open convergence coil resistors . if its the phillips product dont even bother , the tubes are burned and it needs to be rolled out to the curb OR do like some people on You Tube do . Throw it over the balcony and put the vid on You Tube

[stdavross666]

yes...you have to enter the factory service mode and manually adjust the convergence for red blue green CRT's, then do it all over again for every input you have on the back of the tv...it takes a while. service menu for phillips is 062597 then menu button usually. You can seriously fuck your tv in that menu but by the looks of yours you have nothing to lose.

[lukeslasher]

you can do it through the menu just click your menu button untill you see covergence and it will ask for automatic or manual  try that