"Antigravity" Method 6 of 15, Magnetic Mono Pivot or Zippe type centrifuge, Group IIA(ii)
Uploader Comments (JOHNROMANIWASZKO)
Video Responses
All Comments (25)
-
that's pretty cool when you spin it while it's hanging in the air there's almost no friction so it could on spinning for a very very long time! if not air i think it would go on spinning forever, right ?
-
Perpetual motion, even if achieved, would have no useful application. You have demonstrated efficient motion under no-load conditions (i.e. no external energy transfer). As soon as you try to extract any useful mechanical energy from your system (i.e. add load to your circuit) opposing B-field interactions would decrease the strength of the permanent magnets quickly. Without magentizing current (i.e. external energy input) all such devices will stop even with no friction.
-
the only way to break the laws of gravity is through motion,electro magnetic fields arent enough,the problem is that everything in the universe has a magnetic property ,only the use of motion and electro magnetic feilds will then break gravity, it will need a gyroscopic state for the motion ,whilst creating an opposite magnetic field ,,my theory and im sticking to it.
-
i bin designing a devices that uses this device to conduct electricity
-
i bin designing a devices that uses this device to conduct electricity
-
Hi matrixzone5, yes true as a novelty, for example, a coil and tiny solar cells, or back emf or other on the device will keep it rotating, this mechanical energy, can be converted to electrical energy through the interaction of magnetic fields and current-carrying conductors. But in my opinion as a serious generator it may become more problematic to achieve as the rotor will become unstable.
you have a nice laboratory
the purple thing scares me :S
bulgarionlion 2 years ago 22
Hi Bulgarionlion,
Thanks for your comment, this was filmed in 1996, so it is my old lab, my new one at a new location is a lot bigger, but not big enough. As for the purple thing it is a plasma display that I made in 1988 when I was a teenager, and contains a very large 500W incandescent lamp, which would now be considered an antique. The plasma display transmits the power wirelessly to the magnet suspended flicker flame candle that is within the high frequency field.
Cheers JRI
JOHNROMANIWASZKO 2 years ago
and your videos greatly fascinate me! good luck!
matrixzone5 2 years ago 27
Thanks matrixzone5, Im glad I have fascinated, greater thanks to our preceding superheros of science that made it all possible. Thanks for watching and I also wish you the best of luck.
Kind Regards JRI
JOHNROMANIWASZKO 2 years ago
you no yu could create a non polluting generator out of this method and it would draw much attention
matrixzone5 2 years ago
An increase or change in load, will vary the current and the consequential interaction of the magnetic field coils to the levitating base magnets, which will vary the height of levitation, a fixed rotor is more practical. Thanks for your suggestion and comment. JRI
JOHNROMANIWASZKO 2 years ago