homemade rc powerboat
Loading...
5,253
Loading...
Uploader Comments (grantdavis28)
see all
All Comments (15)
-
adjust the pitch of your propeller..darn!,what a nice boat of yours
-
how di u get the remote to control the engine (make it faster and turn)
-
Make
It a flat bottom boat. Or hydroplane boat goes lot faster and splashes less good vid
-
great job buddy im in the middle of making 1 at the moment i have the motor in the boat and all the props are conected to the motor i used a chain driven system because i have to props not anly 1. now if you can tell me what type of servo did you use for the motor to go so the i for the carby on the motor thanks buddy.. thanks for your time..
-
Not a bad boat m8,just try a few different props and maybe some trim tabs COS that thing is gunna FLY,thanx for sharing vid,Cheers
-
hello, thx 4 the advice. i want to use the standard transmission. you have 2 little pionions , 6 or 7 teeth? i try to use the big pinion from the backwheel, and then adjusting with the prop size. were did you bought the little pinion for the flexdrive side? I only hav the original clutch and the backwheel-chainwheel. Did your melted the exhaust? I Want to use the Stock exhaust, with an silencer from tecnigas Next-R , some like that sry for di bad language. . only learned crap at shool
Loading...
nice job im gonna use a 49cc motor to make a power wheels size rc truck.
lowrider1812 2 years ago
@lowrider1812 post a vid!!!! boats are alot easier to make... kinda.. this won has been problem after problem lol
grantdavis28 2 years ago
how did you mounted the prop to the engine??
do you have chain drive?
or you moved engine 90°,
and now the clutch is backwards.
the pinion is welded on the clutch-bell.
did you welded or an threated rod on the pinion?
maybe hard brazed ??
please tell me!!
alex1337bm 2 years ago
@alex1337bm we had a small adapter from the chain drive to the flexi drive prop shaft. engine mounted sideways. we have taken apart the boat and is getting redone. wait a few weeks and we will have a new video with the redesign and picture of the interior.
grantdavis28 2 years ago
what kind of drives are you running or how did you make them
Wcableguy 3 years ago
@Wcableguy running a flexi drive. though in the last second of the clip it snapped lol, boat is now under a full re design.
grantdavis28 2 years ago