Comp Mutha Thumpr in 2008 Mustang GT with Magnaflow Mufflers
Loading...
Link to this comment:
Uploader Comments (randallkemp)
All Comments (21)
-
Lol @ that guy who said his car rattles when he shuts it off, your a dumbass
-
@randallkemp oh ok. thanks for the tip man! much appreciated.
-
@elnrownr Yes and the motor is not forged. I had the motor downtuned while on the dyno that day. It is limited to 5500 rpm right now till I get my motor done. At 5500 rpm I am only at 5 lbs of boost and made about 450ish to the wheels. I also have fuel upgrades, a second fuel pump and 39 lb injectors. They are just maxed out and need to be upgraded to a cobra dual pump setup and 60 or 80Lb injectors.
-
@elnrownr Yes and the motor is not forged. I had the motor downtuned while on the dyno that day. It is limited to 5500 rpm right now till I get my motor done. I have fuel upgrades, a second fuel pump and 39 lb injectors. They are just maxed out and need to be upgraded to a cobra dual pump setup and 60 or 80Lb injectors.
-
@randallkemp so are you saying your making 536 hp w/o any fuel upgrades....isyour motor forged
-
@illbreakurface Yes, I have had it as a daily driver for over a year now. It can buck at low rpms if you are not used to it. If you do it make sure you atleast have a 3.73 or bigger gear in the rear. That will ease the daily driving. I have since added a Procharger, Mac longtube headers, and Mac Prochamber midpipe. I had it dyno tuned down from 536 RWHP until I get the fuel system updated and get a built shortblock. It will still be my daily driver when all is said and done too.
-
@randallkemp @ppeterso22 would u consider using that cam for a daily driver?and wats wrong with it at low rpms?
-
Sweet
1:55Comp Thumpr Camsby ozralli129,324 views
Featured Video- 1:4906 mustang magnaflow exhaustby tombstang76,825 views
- 0:41FRPP Hot Rod Cams Mustang GT SLP Loud Mouth ex...by gafireman10111,384 views
- 1:08mother thumper mustangby nicholasjiggy782,744 views
- 0:562009 Mustang GT, Mutha thumpr cams, magnaflow m...by rodeheavers6,810 views
- 0:3305 Mustang GT Mutha Thumpr Cams w/ QTP electric...by bwbassman666,987 views
- 1:03comp cams mutha thumpers, mustangby remccoll11,515 views
- 2:122008 Mustang GT/CS FRPP Cams w/Pypes Midmuffler...by crimsonredstang27,505 views
- 2:00FRPP Hotrod camsby Vinocular18,903 views
- 0:24BBR cams, pulling out of Dynospeedby jumpforfakinjoy4,398 views
- 1:00shelby gt with mutha thumper camsby ARMORINET1,245 views
- 1:13Comp Mutha Thumpr Camby randallkemp33,574 views
- 0:4906 Mustang GT w/Comp Thumpr with Flowmaster A/T...by djclay7718,196 views
- 1:16Mutha Thumpr cam in 05 mustangby SlipknotPinhead2,586 views
- 1:1706 Mustang GT w/Comp Thumpr with Flowmaster A/T...by djclay7711,952 views
- 2:052005 Mustang GT w/ Comp Cams "Mutha Thumpr" Cam...by ppeterso2258,735 views
- 0:48Comp Mutha Thumpr Cams 2007 Mustang GT/CSby 1badGTCS16,332 views
- 0:4006 Mustang stage 2 comp thumper cams, Mac LT, p...by gjneff132,423 views
- 0:262007 Mustang GT Cammed & Tuned (Idle)by chddb14,910 views
- 1:332008 Mustang GT o/r H Magnaflow mufflersby adopotato873,947 views
whats that rattle noise when you shut it off? mine makes the saaaaame identical sound when i shut it off.
steelstrings1312 1 year ago
@steelstrings1312 The driveshaft rattles with the engine shake when you turn it off. If you push in the clutch when you turn it off you wont hear it.
randallkemp 1 year ago