RyTek - ATAVRXPLAIN PSGroove Guide

WHAT YOU NEED:

 Atmel Flip 3.42 Software - Download from here - http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3886

 The PSGROOVE-PATCHED-ATAVRXPLAIN.hex . (This hex supports Backup Manager)
 An ATAVRXPLAIN Board
 PS3 on Firmware 3.41

INSTRUCTIONS:
This guide is written for Windows 7 though will work with Linux with minor adjustments. Different Windows versions may need minor adjustments.
1. First install the Atmel Flip 3.42 Software. Get the version with java if you don't have the Java runtime installed on your pc.
2. Remove the 2 jumpers from your XPLAIN board that are normally installed when you get it.
3. Put one of the jumpers over PINS 1 + 2 (The pins circled in red on the picture) This will allow you to enter the programming mode to flash the chip.
4. Connect the board to your PC. It should detect is as an Xplain USB Gateway. Don't install any driver for it yet. Just close the driver window if it comes up.
5. Open up Device Manager and you should see Xplain USB Gateway in the list.
6. Now you need to do the tricky step. You need to reset the device to get it into programming mode. To do this you need to connect the 3 pins (circled in blue below) together for around 4 seconds. Use something metal and hold it against these 3 pins. Make sure you don't touch any other pins just those 3 circled in blue. You should still have a jumper connected over the 2 pins circled in red.
7. You will know it's worked when Windows finds a new device. Should be named - AT90USB128 DFU V1.0.2
8. Right click it in device manager and choose update driver, choose "browse my computer" then click "Let me choose from a list". Click the "Have Disk" button then browse to C:\Program Files (x86)\Atmel\Flip 3.4.1\usb\
9. Select atmel_usb_dfu.inf
10. Choose AT90USB128 from the list and let it install.
11. It should install and should now be named AT90USB128 in device manager.
12. Now open up Atmel Flip 3.4.1 software and click the top left microchip icon button.
13. Select AT90USB1287
14. Now click the USB icon and click USB, then click open.
15. You know it's connected correctly if you see a value in Bootloader ver. in the right box. It doesn't matter what this value is just make sure there is one there.
16. Don't change any of the settings or boxes leave them on default.
17. Go to file and load hex and select the PSGROOVE-PATCHED-ATAVRXPLAIN.hex that was included in this zip.
18. Now simply press the Run button on the bottom left. If you get 3 green lights on the left after its completed then everything went fine.
19. That's it! Done! Now just remove the device from your pc. Remove the jumper from pins 1 + 2. There should be no jumpers on any of the pins now. And connect it to your ps3.
20. Remove the power plug from your ps3 then reinsert. Turn on the ps3 and then quickly press eject.
21. If the light on your board changes from orange to green that means it's worked and you have now jailbreaked your ps3 and it is in dev mode. You should see an Install Packages icon etc.
Any problems, comments or talk write in this forum thread below.
http://psx-scene.com/forums/showthread.php?t=65292
OR

Category:

Gaming

Tags:

• PS3
• hack

[ThefirstSBG]

Somebody please make a simple one on how to do this with only a usb labtop and ps3 i dont want to buy this are there any dowloads im trying to mod black ops but i dont know what the fuck to do

[lusher00]

@preemz10314

They only cost $30 NEW on digikey. What kind of hustle you trying to run jerk ass?

[Micoooog]

how would i do this on a mac? is it possible ? cheers

[preemz10314]

I HAVE 2 FOR SALE WITH THE USB CABLE. MESSAGE ME I WILL DO A PRIVATE AUCTION ON EBAY. 55US FREE SHIPPING +25 INTERNATIONAL BE QUICK I ONLAY HAVE 2 LEFT

[lakerfanalways]

Can you show us a video starting from the beginning of how to do this..what I am worried about is taking out the pins, etc..so if you could start from the beginning and work your way forward that would be great

[dsid4evr]

so whats easier this or ti?

[soltan50000]

I love you Man

you are GREAT

Keep up