Speed Dome Camera Settings-BXB FCS Series digital conference system

4.6.1 Each Speed Dome has the function of Auto-Image Tracing & Positioning which can be set up from the main control unit. Each chairman/delegate unit could set up to16 Speed Domes which has 128 Programmable Preset Positions of each camera.
4.6.2 Press MODE button -- move ◘ to SPEED DOME SETTING mode（the 2nd page of the MENU） --（）ID code 001 displayed under MIC column -- press UP or DN button -- select the ID code of microphone
4.6.3 The conference system totally has 1,009 groups of ID codes.
4.6.3.1 ID code of delegate unit: 999 groups of numbers from 001 ~ 999
4.6.3.2 ID code of chairman unit: 10 groups of numbers from **1 ~ *10
4.6.4 When ID code of microphone has been selected -- press STEP button -- move to right side to ID code 001 under DOME column --（）ID code 01 displayed under DOME column -- press UP or DN button -- select the ID code of IP Speed Dome (See the Appendix ID Codes of Speed Dome camera)
4.6.5 One main control unit can control 16 speed domes cameras. No. 01 ~ 16 is the ID code of these 16 speed dome cameras.
4.6.6 When ID code of speed dome has been selected -- press STEP button -- move to right side to ID code 001 under ADR column --（）ID code 01 displayed under ADR column -- press UP or DN button -- select the Programmable Preset Positions of Speed Dome.
4.6.7 Each speed dome has 128 Programmable Preset Positions.
4.6.7.1 When the figure under ADR column displayed 001, it is the 1st Programmable Preset Positions.
4.6.7.2 When the figure under ADR column displayed OFF, the function of Auto-Image Tracing & Positioning is disabled.
4.6.8 When above three steps finished setting --press SAVE button to save the setting value of the speed dome camera-- When SAVE button is pressed, the LCD will be displayed in the following information "Save....OK".
http://www.bxb.tw

Category:

Science & Technology

Tags:

• audio conference
• conference system
• conference microphone
• Interpretation system
• Gooseneck Microphones