HK 500 TT Hobbyking
Loading...
Uploader Comments (motoxxx996)
All Comments (11)
-
Usually the frecuency of the servo isn't the same as the gyro and the servo get warm and die. If you don't have the info about working frequency of the servo and the gyro to check that it is the same, then check the temperatura after 4 minutes of fly. If it get high, then set the gyro in analog servo mode because the frequency are diferent and the servo will die some.
-
@trexinvert i had that gyro no luck i have a align gp750 for mine
-
you happy with this heli what was your total cost nice video
-
Flies just as good as a real t-rex? How can you tell that by hovering a bit?
The GoTeck 9257 servo's die after very short time (one after 5 minutes on mine), then the tail exploded (screw broke off) and then te belt broke (correct tension). I had all the crappy electronics in mine and changed them for quality Hitec and Savöx stuff.
I would rather buy decent servo's and a cheaper esc than a CC esc and servo's that fail... I never burned up a HK esc (not even the cheapest ones after hours of use).
-
So you got the 401B work okay? That's awesome for less than $20. I have a friend who gave up on it, but I guess he didn't know what he was doing. The align esc is pretty reliable, but went bad after about 3000 flights( x 5.5 min's approx 275hrs or 16500 min).
3:15
HK500GT Build Guide Part 5 Electronics Installby RcHelpDotCom2,325 views- 6:03
T-Rex 500: Flight and Crashby SystemHalted6921,334 views
- 1:40
HK500 CMT TTby cutekenny4,443 views
- 5:26
HK 500CMT torque tube review part 3.by 2011HobbyKingReviews1,223 views
- 4:21
HK 500 GT REVIEWby RotorHead26522,195 views
- 1:58
E SKY 900 RC Helicopter Test Flight - 500 classby sv211542,917 views
- 8:21
hk 500 cmt Heli sesion 2by HoskoMichal5,049 views
- 2:07
HK-500, T-Rex 500 clone crash...by nunomftomas19833,272 views
- 9:14
RC Aerodyne AS-350, hk-500 CMT TT, 1300 kv, 3000ma, 6S , Plush 80 A, HK 401 with Futaba 9257by gaetanboiv1,177 views
- 7:16
HK 500 BO-105 (part 6 Helicopter ready)by MrPorichis1,980 views
- 6:12
EXI 500 MODSby victorm3161,635 views
- 0:27
HobbyKing Viper Jet Firing Up.AVIby samste2,191 views
- 13:01
T-Rex 500 ESP, FBL, Microbeast, Scorpion HK-4015, 1450 kv - Flug in Münster 07.05.2011by helifreundeTV2,128 views
- 6:09
HK 500GT First Flightby gt3racer10132,305 views
- 5:21
The New EXI 600 V2???by nuttcaze33,666 views
- 4:04
CopterX 500 TT - Done Mountingby ArcticRc1,067 views
- 1:42
Goteck D9257 Speed Test Shootoutby skyhobbies1,170 views
- 7:07
HK500CMT Elapsed Time Build and Reviewby 2010HeliPad2,039 views
- 2:55
HobbyKing - New HK-500GT Carbon Fiber/Alloy Helicopter Kitby HobbykingLive103,447 views
how have you set the gyro with the gd 9257 servo,digital or analogue..cheers.
somethinextra 7 months ago
@somethinextra I had it set to digital but it stopped working after about 6 hours of use. I do not know if it was related or not.
motoxxx996 6 months ago
Castle Creation ESC???? There goes your savings!!
trexinvert 8 months ago
@trexinvert
Ya I know but I was afraid to put a cheap esc in it because I am afraid of it burning out and losing all control.
motoxxx996 8 months ago
How do you like the 401B gyro? Try flying backwards or tail down full(...if you can), will the gyro hold?
trexinvert 8 months ago
@trexinvert
It holds about as good as my gy401 in a tail slide, they both blow out in the end on my helis. I cannot fly backwards at full speed, but it does fine slow backwards.
motoxxx996 8 months ago