Sneak Peek at Neenah® Imageclip LaserDark™ Transfer Paper

This Sneak Peek video is presented by Doug DeWitt, Transfer Paper Product Manager for Condé Systems. Doug demonstrates the use of the new Neenah® Imageclip LaserDark™ Transfer Paper. This transfer paper works with any oil or non-oil color laser printer or copier and lays down color images on dark garments in an easy two step process that does not require any cutting or trimming. Call Conde at 800-826-6332 with questions.

This video applies to Conde part numbers: 9849PO-1117L, 9849PO-8511L, 9849PO-SAMPLE

Category:

Howto & Style

Tags:

• doug
• dewitt
• dewit
• de
• wit
• witt
• nee
• nah
• image
• clip
• lazer
• dark
• laser
• lazerdark
• neenah
• transfer
• paper
• sublimation
• tee
• t-shirts
• heat
• press
• ImageClip
• Conde
• Imageclip
• LaserDark
• Transfer
• Paper
• sublimate
• 9849PO-1117L
• 9849PO-8511L
• 9849PO-SAMPLE

[pakt40]

Thanks for your reply but I have wasted about 10 sheets trying to get this to work and this paper is not cheap. I made an error in my last post, i am using a temperature of 250° pressing for 20 seconds, at medium pressure. I went all they way to heavy pressure and the design sheet still has spots where the emulsion sheet did not transfer completely. Any other suggestions?

[condesystems]

@pakt40 First, make sure you do not cover the two sheets in the press with a teflon or silicone sheet, as these will effect the heat needed to fuse the white base from the transfer sheet. Also, you could try raising the temperature of your press to 255 or 260(F). Please view our new 5-part video series on Neenah Imageclip Laser Dark at condetv. com for more suggestions and tips.

[condesystems]

The weeding step should be performed at 250(F) for 20 seconds with a Medium pressure. If you have areas of your image that were not covered by the white base, then that is usually an indication that your pressure is set too low. Please refer to our new 5-part video on CondeTv (condetv com) for more tips and suggestions for Neenah Imageclip Laser Dark.

[jsclownn]

will it be available sometime this week? also, what if I wanted to do a 2 color print, could I still use this transfer?

[condesystems]

@jsclownn Imageclip Laser Dark works best with Clip, Line or Vector Art Images. As long as "White" is not part of your design, then Imageclip Laser Dark will work. If you have a design where white is a primary color, then we suggest using a "one step" Opaque Material and not Neenah Imageclip Laser Dark. Please view our new 5-part video series on Neenah Imageclip Laser Dark at condetv. com for more suggestions and tips.

[pakt40]

having trouble with the weeding part . I placed the two sheets together then press for 20 seconds at 275°. (you did not give the pressure in the video but I am using medium pressure.) when the timer goes off, I separate the two sheets but the sheet with the design on it is flaky with areas not covered. I am using a new hix swing away press for pressing.

[Ray2isme]

Very informative and easy to understand

[cworso]

very informative

[bobbicoker]

Very professional video