Dragonfly 4 Hovering
Uploader Comments (rcairplaneworld)
All Comments (10)
-
How do you get im so stable??
Do you use the trim sticks or are you just a good pilot. I've got this helicopter to and it is a great helicopter!! Thanks
-
It can also be that the tail rotor isn't hooked in with the tooth gear.
-
thanks because it was flying grate i set it down in a perfect landing went to take it off and no dice just spinning
-
my tail rotor is not working what might the problem be???
-
thanks i have fixed this problemb but how do i stop all the virbrations off the helicopter and how do istop it from drifting to the left
thanks foryour help
-
it keeps spinning round even when the tail motor isnt moving? and do i tighten the main blades to max because at the moment i am using them how they came in the box just lining them up each time i crash? thanks
-
how do i stop the heli from spinning around loads when i am about to take off i just started flyin oday and thanks for the website rcairplaneworl it helped me alot!
Most likely the tail motor has burned out - a very common issue on helis like these. Before you buy a new motor though, check all the connections to it are OK.
rcairplaneworld 4 years ago
The tail rotor is there to control the spinning - if you can't stop the heli spinning round then the tail motor might be faulty. Does the tail rotor respond to the stick movements on the trasnmitter ok? Holding the stick over to the left should slow the tail rotor, putting it over to the right should speed it up.
Glad to hear that my pages are helping you ;-)
rcairplaneworld 5 years ago
Practice ;-) Click on my web address to the right of the video box above, and have a look through the pages I've written about setting up the heli. Drifting to the left is normal, you just need to learn to control it before it happens. Keep at it, you'll get there.
rcairplaneworld 5 years ago