Philips HID 4300K, Sharp Colorful Cutoff, Color Flicker, 2011 Camry Stock Projectors STi-R Lenses
Uploader Comments (epsilonian818)
All Comments (17)
-
@whozjodaddy If you're referring to the blue light on the edge of the white beam, you can't make that happen artificially. The blue light is a result of a powerful white light being passed through a lens and the lower strength blues and violets bend and become visible on the fringe of the white beam. (think of a light passing through a prism but to a much lesser degree)
-
@peruvianandproud get some HID kit from ebay DIRT CHEAP than go to a cop and ask since you don't know about glare (THAT WOULD BLIND ON COMING TRAFFIC!) and ask if its too bright or if its legal and if you get a ticket than its ilegal and if the cop said its okay than DO IT!! (search it in honda accord forms its evehwhere) NOT TO HATE ON ACCORDS BUT I RETROFIT MY HEADLGHT IN MY ACCORD TO RUN LEGAL HID WHEN I OWNED IT! JUST LET YOU KNOW GOOD LUCK!
-
@whozjodaddy Change the Lens and adjust the cutoff shield inside.
-
How did u modify the projector to display the different colors?
What kinda projector in your headlight, were they OEM or retrofit ?
vinchuan2 2 months ago
@vinchuan2 OEM Camry halogen projectors, But I modded the shield, and replaced the stock lens with an STi-R Clear lens from TRS.
epsilonian818 2 months ago
Wow ! Very impressive. Are you running with 35w bulbs or 55w ?
vinchuan2 2 months ago
@vinchuan2 Thanks. They are 35W
epsilonian818 2 months ago
hey, i had a question on how do you install the lens you bough from retrofit source and how do you adjust the cutoff shield? Do it require alot of modding? I am installing it in the same car as you.
Btw great post
neuro112 10 months ago
@neuro112 Take apart the light, and the projectors and there are screws that hold the lens in place. Remove the lens tabs and replace the old one with the clear one. Modding the shield is just slightly bending it 1-2 millimeters
epsilonian818 9 months ago