S2ki dyno night, AP2 S2000 all stock...
Uploader Comments (Submariner1999)
All Comments (17)
-
He has wheels spacers does'nt he? Stance looks a little wider than factory?
-
@rg23x if is says it has 400 BHP, then that's the crank figure, but WHP is what actually gets measured at the wheels. typically speaking most cars lose about 15-20% of their crank figure, so a 400 BHP car would probably register anywhere from 340-320. EG: S2000 makes 240 BHP or with the new SAE corrected figure 238, multiply that by 15% or .15 and you get 202. this isn't "spot on" but it's real close. with 238 x .20 it's 190.4
-
its so beautiful i want one so bad!
-
Quite right, I always say suspension first. What's power mean if the car is not stable/ controllable.
-
@rg23x oh ok dude cool. that makes sense. thanks man!
-
That does NOT look like the stock suspension to me....
-
i thought the s2k came 240hp stock. i'm confused. someone please explain.
-
rly beatiful car
-
finally, nice to see a stock s2k on the dyno measuring its true hp.
-
@marlo916 yea its a big loss but it might just be the dyno plus its rwd so you lose a little more power then lets say fwd crank to dyno
It really depends on the dyno. This car was one of the highest stock numbers of the day. It also put down more then most of the lightly modded AP1's. The highest naturally aspirated S2k at the event was 211.xx. I've seen stock ap2's dyno 210 or so but it just depends on the dyno, there was a couple cars here who didn't get within 10whp of their last numbers on a differnt dyno.
Submariner1999 2 years ago