Alert icon
We're changing our privacy policy. This stuff matters.  Learn more  Dismiss

Derbi gpr50 polini 80cc

Loading...

Sign in or sign up now!
Alert icon
Upgrade to the latest Flash Player for improved playback performance. Upgrade now or more info.
10,202
Loading...
Alert icon
Sign in or sign up now!
Alert icon

Uploaded by on Sep 12, 2008

Derbi gpr50 youichi ui replica

SETUP:
polini 80cc cast iron
Arrow exhaust
Hebo reed block and carbon reeds
17.5mm carb (102 main jet)
Gearing: 15/52
top speed 70mph on flat at 12000rpm

Category:

Autos & Vehicles

Tags:

License:

Standard YouTube License

  • likes, 0 dislikes

Link to this comment:

Share to:

Uploader Comments (50ccpower)

  • top speed?

  • @xristakosgr

    top speed is a genuine 75mph/120kmph, the bike is not at top speed in the video.

    It's doing roughly 100kmph/ 60mph.

  • ... or something rediculous (ive never revved mine past about 11300 while riding..

    but yeh it would easily pull 12000 if i revved it that high.. it pulls anwhere from around 9k is the limit.. anything under that and it cant pull it.. il get a top speed for you tomorrow or somewhen (:

  • Thanks for the info, did you manage to get a top speed from your bike, Had mine clocked by a car and it was at a genuine 70mph but had about 250rpm left so should do 72mph.

see all

All Comments (15)

Sign In or Sign Up now to post a comment!
  • met je pannenkoek

  • i havent checked top speed due to poor weather and having a puncture at the moment.. but i get a TRUE 68.2 at 10,000 revs

  • I have seen the jolly moto exhaust and they are meant to be very good and a high revving pipe. It's not the size of expansion chamber that decides the max rpm is it? Because i have another exhaust, custom made by someone and it will allow a bike to rev to 13500rpm. And the expansion chamber isn't that big, just a short exhaust similar shaped to the metrakit pro race exhaust.

  • i bought it off ebay.. i just looked for a 420 pitch sprocket because thats the pitch of the chain..

    only problem is its drilled so that when you put the plate over the top, the grooves line up perfectly :( .. so i just used my grinder to grind to little indents in the side of the plate that bolts on the front of it.. and then bolted it on..

    yeh its not to bad.. although you have to cruise at higher revs, because my bike has power from say 8.5K all the way up to like 13000 or something (pto)

  • where u running a malossi mhr 80cc? the difference between the standard malossi and the mhr is: the mhr is where the malossi uses only 1 piston ring (as opposed to 2 in every other displacement kit) plus they use it in their track-only bikes so the squish could've been reshaped and the head could be shorter (decked) for more compression, but u can to that at a local machine shop for wayyy cheaper than buying the kit. did any1 run jolly moto exhaust on their GPR? the expansion chambers are huge!!

  • Mjj4 Where did you get your 17 tooth front sprocket and what sort of acceleration does it have as i was thinking of getting one, are you running a polini 80cc with that setup and speed. Does yours rev to 12000rpm with that gearing and what was the true top speed you have had out of it

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more