Hand Soldering a .5mm QFP Chip With SchmartBoard|ez

SchmartBoard|ez makes it easy, fast and flawless to hand solder surface mount components. See more at www.schmartboard.com

Category:

Howto & Style

Tags:

• circuit
• board
• solder
• electronics
• pcb
• prototpying
• surface
• mount
• SMT
• solderbynumbers.com
• Schmartboard

[mtttee2]

I thought solder flux was used to remove the oxide layer on the track. Any solder tip that came in contact with solder flux will damage the solder tip because the solder flux contains acid. Why you did not use solder paste instead?

[nealgb]

The technology is to melt the lead free solder in the grooves and water soluable flux allows this to work. One may have to re-tin their tips from time to time...but it is a small price for being able to hand solder very small pitched ICs.

[6364gg2]

I hava chip in the ZEP package! How do i solder that???

[nealgb]

Do you have a part number...I'm not familiar with ZEP

[6364gg2]

TI calls it that. I found out it was BGA

[nealgb]

if it is 1.27 or 1.0 pitch...we have a board

[wushuk1ng]

I bet you I can create a short.

[mcliars]

I watched the whole video with my mouth open.

[mark33sv]

What kind solder tip used? watts??? wha do u recommend?

I've try to solderin on myold motherboar soby latop's.. it was ash#$#$ but still have opportunity to fix it!.

I used iron tip 30Watts or 25Watts .. i coudn't soldering.

I need to know what kind of tin apply on this cases of soldering..

[Riskteven]

Doesn't the tape charge up a lot of ESD electricity (dangerous for electronics)?

Being in a completely dark room while unwinding tape from a roll or removing tape reveals a faint light where the tape is pulled off. It is electrostatic discharge, ESD.

[modsoul]

@tehabc NOBODY GIVES A FUCK

[excriminal1]

very nice video

[donrex1943]

the solder on the middle bottom joint looked balled up and terrible.

[eryksun]

tehabc should know that Early Modern English was very diverse, and American English took a unique path to its own standard. In Early Modern English, "solder" can be seen as souder (French), soder, sowder, sawder, soulder, and solder. Here's Philemon Holland (a scholar educated at Trinity College, Cambridge) translating Pliny in 1601: "To soder such gold, there is a proper glew or soder." So, tehabc, 'sod(er) off'. Maybe take some (h)erbs to chill out. Anyway, nice video.

[boywithnoarms]

ESD SHIPMATE

[deeznuts1776]

@tehabc nobody likes a smartass nerd.

[tehabc]

SOL-DER NOT sah-dar. Stop butchering the English language.

[GENERALCHAOS13]

OMG i want 1 of those for my 5 nxp lpc1766, 3000 series and a mini break out board for maxim ic MAX8622ETB+ , MAX1878ETC+ ,MAX1932ETC+ ,MAX1790EUA+