Bow Tuning Tips / Broadhead Tuning
Uploader Comments (grttaxi)
All Comments (62)
-
Is 15 yards far enough back to broadhead tune?
-
@MrDeerHunter098 move the sight to get dead on .. if the arrow lands too high move the sight up if it lands to the right you move to the left etc
-
Say my field tips arent sighted in. Should i move my sights or the arrow rest to get my field tips dead on?
-
Will this work the same for 2 blades?
Are 2 blades harder to tune?
-
I have the same problem but with a longbow, shooting off the shelf. Do you have any suggestions? Thanks
-
Thanks some much for the tip i had my Broadhead hit there mark with in 10 shots thanks so much.
-
on a level of aerodynamics indexing the broadhead to the vane is irelevant !! i have tried it and there is no differance at all
-
how'd you get a z7 in 2010?
-
Thanks For The Vid, This Really Helped Me Out Alot! Keep Posting Vids!
-
Hi there I was just wondering if you sight in one fixed blade broadhead, say a muzzy, will all fixed blade broadheads be tuned, or just muzzy not a g5 stiker and such? Thank You and nice shooting
i have a trophy taker drop away and I shoot muzzy 125 grain and my arrow shoots low and right with the broadhead. i moved the rest to the left like you said to do and it brought the windage right but the elevation is still low. I don't know how to adjust that. How important is it to have the broadhead lined up with the fletching?
2eldon6 1 year ago
@2eldon6 Ok now just move the rest up some until it hits dead on. You don't have to line up the fletchings but I like to keep everything streamlined.
grttaxi 1 year ago
Kenny once you do 20yrds will 50 and 60 be on?
abttileman 1 year ago
@abttileman I would shoot at those distances sometimes you have to make fine tune adjustments at longer yardage because the distance will magnify any little tune problems. I reccommend that you shoot at 100 yrds this will eliminate even the most minor tuning issues.
grttaxi 1 year ago
I have a QAD fallaway and it doesn't have elevation adjustments only windage. what can i do about the elevation part?
iwillylicker54i 1 year ago
@iwillylicker54i Either move your nock point or you can tilt the rest by moving it on the risor so that its up or down whatever you need it to be.
grttaxi 1 year ago