Dual HHO Generator Install on Toyota Camry!
Uploader Comments (asusreviews)
Top Comments
-
Pass the word...BE CAREFUL WITH DRAIN OPENER!!! If you add aluminum you've got a pressure bomb full of acid, not a toy folks, seriously.
-
Here something to consider with adding hho porting to your intake. There is less vaccum at the entering head of the manifold. I found this out when doing this to my car there was no vaccum what so ever at idel only at high rpm on tube in plenum. Air box is the way to get good vaccum on your cell to bring in the hydrogen. I think it is the venturi effect that makes vacuum high at box top side. Also be carful drain cleaner will eat aluminum heads on engine blocks. Good Luck!
All Comments (23)
-
I live in a motorhome and feeding a 460 ford at 6.2 MPG is hurting my butt big time!! I would like to play with this concept. Do you think it is possible to create enough hydrogen from a 5kw generator to feed a 460 ford soley on hydrogen? The genset burns 1 gallon per hour at full load.
-
what was your fuel economy without the setup?
-
I can see your toes at 2:18.. yummy..
-
hydrogen idoest burn but it explode,,,if you make a mistake even how slight it is it would cause explosion,,,very dangerous
-
do you have to tune it?
-
@asusreviews WELL SAID ..... GOOD JOB !!!
-
that was on my old setup when I ran my wires inside the generator now I have terminals I clip on to to fix the problem
-
nice install - what were your results of your mileage tests?
I look forward to seeing more vids.
Keep up the good work.
:)
WARNING: Don't use ABS or PVC for you generator. It's fine for the bubbler though. It crapped up my plates big time with brown gunk that came off from the ABS. I thought ABS was rated at like 150C, but other sites I see suggest that its only rated at 80C, and boiling point is 100C. My cells were getting a little hot, and so the side walls of the ABS pipe started "taking a crap" on my plates. Now I have everything taken apart, and need to find a better container...
asusreviews 3 years ago
asusreviews 3 years ago
Nice install.
lutherp40 3 years ago
Thanks. I've watched some of your videos... when are you ever going to do an install? You seem to have a number of designs, and of them work well yet?
asusreviews 3 years ago