Leimbach 5 Stage Telescope
Loading...
Loading...
15,300
Loading...
Uploader Comments (LilGiantsConstrCo)
see all
All Comments (11)
-
I like the rear tires on the tractor and the trailer works great. Almost turned over like a real rock bucket. 5 stars
-
how i have this
-
hey
it may be commpressing air on the final stages, (due to your twin pump set).
The solution to that is to completely fill the ram with oil when extended. I am not very good at rc's but i have seen it on A 20ton tipper before.
or it is that it Is being loaded too heavy. this seems unlikely but on the 3 final stages the pumps/rams seem to strain and this is due to it requireing more pressuer to tip.
you can test the final one by loading soley on the back end of the trailer.
Roz
Loading...
5:00
A friends request to see the sticks.wmvby LilGiantsConstrCo63,406 views- 0:39
Too much rain... quarry floodby LilGiantsConstrCo36,112 views
- 6:26
Leveling out of the roadwayby LilGiantsConstrCo127,125 views
- 3:32
Nice day to haul outside with the A25Cby LilGiantsConstrCo56,465 views
- 6:17
Equip Move Excavatorby LilGiantsConstrCo19,532 views
- 0:40
Oops...by LilGiantsConstrCo43,177 views
- 2:26
NEW Dirt Lump Crusherby LilGiantsConstrCo93,382 views
- 1:20
740 climbing out of the hole with a load onby LilGiantsConstrCo58,297 views
- 7:37
Moving Lumpsby LilGiantsConstrCo65,046 views
- 1:18
BD Trl Unloading into Conveyerby LilGiantsConstrCo73,005 views
- 9:23
Cleaning Out from under the Holding Binby LilGiantsConstrCo6,116 views
- 1:02
B train unloadingby LilGiantsConstrCo32,142 views
- 9:01
Vibra 2by LilGiantsConstrCo11,889 views
- 5:01
Movie 0010by LilGiantsConstrCo7,539 views
- 6:04
WA500... with a few wks practiceby LilGiantsConstrCo6,054 views
- 0:43
1/14 Tamiya Knight Hauler Buildby radiocontrolpimper9,488 views
- 0:22
AFV Dump truck tipsby body9111156,415 views
- 6:07
Dozing away from the wallby LilGiantsConstrCo10,772 views
- 2:23
Holding Binby LilGiantsConstrCo75,735 views
- 1:07
2011 ECMT Peterbilt Dumpby Scentlessapprentice94,544 views
where did you get your hydro cylinders ? and pump?? i know they can get spendy. is there a reasonably priced sorce for the parts?? ir so where? could u post or pm the site to me? no doubt its probably german made!. lol
livefree4780 2 years ago
Leimbach Modellbau of Germany, makers of many different sizes of cylinders & pumps.
For you in the USA, you'd have to buy from PMD (gardentrucking com), importers for Leimbach.
The above cylinder is long since discontinued.
LilGiantsConstrCo 2 years ago
its problely loaded to haevey their for requiring more presser making the sils strain an releasing pressuer or hdlic pump going down .
cowbubbles 3 years ago
No. The seals are fine, there's no oil slobber on the telescope. If anything, the box when empty is too light!
When the endgate sticks shut and the box stays full, if I reverse the hyd pump, all four stages collapse in the proper order.
Perhaps to make the telescope function properly when retracting would be to add a pound or two of weight to the nose of the box so there's some downward force there.
Doesn't really matter though, it goes up & down fine the way it is.
LilGiantsConstrCo 3 years ago
how much can the hydraulic telescopic arm can lift?
CraneTruck21 2 years ago
Don't know. Depends on the bypass pressure setting of the pump.
Box full of dirt, +30lbs, I'm guessing, it lifts one end of it no problem.
LilGiantsConstrCo 2 years ago