Another racing Mower Project

Here is another project that i am about done with, I am building this for a new member of the REDRUM race crew. So far I have 4 member and counting, I am working on getting some land to build a Bigger track, with at least 3 seperate tracks in 1. will find out the 8th of Jan, 09.

Category:

Sports

Tags:

• lawnmower
• racing

[musician1232]

what pulley sizes u usein

[murdrsickl]

@musician1232

It all depends or the tranny you use, but normaly I use a 6 or 7 inch in the front and a 4 to 5 in the rear, You have to play around with them

[murdrsickl]

it all depends on how much the motor weights, if ya can give me a e-mail address, I will see if i can find some photos of what i did

[murdrsickl]

yea I flipped the front end over and welded it back in, works great when ya don't have the cash to but a regular racing front end. This was a very low budget build, but I still made a safe build. Yep, it is a 15hp Kohler. Ran real good till the kid i was making it for decided to use it for a 4 wheeler, snapped the tranny in half.

[murdrsickl]

brodman44

I used a regular Door Hinge from a house door, put it where i wanted it, bolted it to the running board, then took a peice of 1/4 inch brake line and tack welded it to the body about 6inchs from the pedel, welded a 1/4inch bolt to the pedel, ran my cable through the line and put a eyelet on the cable and bolted to the pedel. will help ya out the best i can.

Hope that works for ya.

ZZ-MOWRIDER

[dirtscooterer06]

how do you get it low to the ground like that?

[murdrsickl]

It's the Voodoo that I do HA HA if ya want, i can send ya some photos if you have a e-mail

[bison299]

is that a Ranchking MTD ?

[Chevypower265]

@murdrsickl You wouldn't mind sending me some of those pictures would you? Thanks!

[freespeachrulez]

Yeah steering will make it safe.

[evinsteven13]

would it be possible to get some photos or a video of the front end spindles etc? Im building one now and putting a sportbike engine in it, I need to know what to use to accomodate for the extra engine weight, thanks

[evinsteven13]

would it be possible to get some photos or a video of the front end spindles etc? Im building one now and putting a sportbike engine in it, I need to know what to use to accomodate for the extra engine weight, thanks