P3 The Key To Stanley Meyers Water Car, Gas Electrical Hydrogen Generator, Self Staining Device...
Uploader Comments (rwg42985)
All Comments (85)
-
Stan injected water directly into the cylinder not by using electrolysis inside the cylinder . Look@ Stan Meyers patents. His injector shows the injector spraying the water through a plasma field inside the injector and doing electrolysis inside the cylinder and using the expansion inside the cylinder to generate pressure to push down the piston thus creating work. He was telling you about electrolysis in his videos but you have to look at his patents again
-
I meant to say Magnetohydronamic. Sorry.
-
I've been looking over everything I can find on stans work and I agree there is something he left out pertaining I think to magnetics. It's good to see you are on the same track with that and vacuum. Specifically I am wondering about the reason for his tube shaped cells over flat, and that lead me to look in the direction of each tube perhaps being a hydrodynamic motor to shake the bubbles free as in Trvd2XOIeXY. That with some engine vaccum and magnetic seperation of elements. Your thoughts?
-
I was going to send you my ORIGINAL Stanley Meyer information pack from Auckland New Zealand including the original Windows 95 WFC software until I'd watched this Video and you'd asked for money Mr Russ Grease. Stanley Meyer didn't want any money from the Maori people when he'd shared his knowledge so why should you get any?
Now you can just h t t p : / / w w w.m e g a u p l o a d . c o m / ? d = X O W 8 V K G Q Dream about something you'll most probably never ever acheive in your life!
-
There's NO particle accelerator BS. In your video your showing a spark gap which is like a Tesla Hairpin circuit that turns the hot electricity into the cold electricity. If Meyer used a Tesla Hairpin buzzer circuit then he's adding radiant field electricity to his capacitor cell an a antenna used to charge a battery. Why bother as when its properly tuned the more plates you add lowers 0.??amp draw & draws more energy from sorrounding space just power a 10 or even a 30 KVA genset to power house.
-
I was thinking you would be able to get magnetic energy into the gas by using an air ionizer and ionizing the ambient air as Stanley did say in the movie the argon gas is the insulator between the - and + gases. the ultra violet laser also increased the magnetic field with each pulse,ultra violet light has an affect on particles by making them + or - charged not to sure now witch is witch will need to look it up, the laser was also used to pump the gas.
Stan gives some details about this device in his new Zealand lecture. Check it out
runshousee 10 months ago
@runshousee Yes, thanks! If you watch part 2 I went threw the hole video and explaind the my thoughts! Thanks for the tip tho! ~Russ
rwg42985 10 months ago
Stan used distilled water, stainless steel tubes and a 20khz stair step DC pulse train. The tubes were capacitors fed by voltage though coils to form a SERIES RESONANT CIRCUIT. The VOLTAGE builds up on the capacitors (tubes) due to CHARGE PUMPING from the DC Pulses. Somewhere around 2kv the hydrogen / oxygen bond breaks (due to voltage breakdown of the insulating properties of the Distilled Water). Durring the off cycle the water recovers. He was cracking the water with Voltage not Current.
johnnyrocksable 10 months ago
@johnnyrocksable Yes that's corect. , and? What exzacly dose that half to do with the EPG? Thanks! ~Russ
rwg42985 10 months ago
@rwg42985 I don't understand the term EPG. I'm not sure what the question is. Please explain EPG to me. Thank you.
johnnyrocksable 10 months ago
@johnnyrocksable Hey, its all good, see the description and watch parts 1 and 2 as they will get you up to speed! EPG = electrical particle generator.
Most don't know of it but it's apart of stand work.
See patants in description.
Anything else just let me know!
thanks, ~Russ
rwg42985 10 months ago