KDS FlyMentor 3D Mounting

No description available.

Category:

Entertainment

Tags:

• KDS
• FlyMentor
• 3D
• Mounting

[dani260890]

Hi, where can i get one of these bubble levels?

greets from germany

[Gourvelos]

@dani260890 I found it on eBay under tools but I think hobbyking also sells them now

[arbien3]

This is a very strange way to set up Flymentor. All you need to do is set gyro position 0 to the balance mode gain, gryo 1 to the position mode gain. Then set MIX one to -100% in both directions with the other paramers as in video. The gyro switch up is then balance, down is position. The second switch simply turns the sytsem off when you put it in the down position.

This also makes it clear what the sensitivities are [remember 50% is zero! just like many gyros - see manual]

[Gourvelos]

@arbien3 Agreed... you re 100% correct, I was following some one elses post regarding the settings back when I made this video and I thought there has to be an easier way but none the less I set it up per their settings, however setting up a few since then I changed it to your way so that the second switch cancels out any % but havent updated the video, when I realised this I was thinking to myself how could I have missed such an obvious thing...Maybe because I myself didnt have a flymentor then

[rodrigobamorim]

Hello from Brazil! I have a company that makes aereal photografies and today I am using a T-REX 450 V3 to fly with a cam and make photos. I am really interesting in buy a Flymentor system, but my doubt is: Flymentor can stabilizer the helicopter in hight altitudes (like 20 - 30 meters from the ground)???

[Gourvelos]

After 3M in height you can only use balance mode.

Balance mode works well for photography, I use it for my FPV setup, fit hold the balance of the helicopter, you still need to control it but gusts of wind are counteracted by the flymentor, I hope to have some video footage soon to put up so people can see. Soon I may even place my camera on the heli and take photos as well.

[onkelbolle]

Soooo, what you do is to set the Flymentor to manual mode (red light), adjust subtrims to it hovers right and then switch on the Flymentor to positioning/balancing-mode?

[don021980]

do you know how to set it up on k-7x transmitter?

[IvanBarb4]

Hi... The video is excellent! But could someone PLEASE explain what is actually happening with the values when switching from "position-balance-off" particularly with the newer switch setup suggestion (top most post) I'm not understanding how the ELE D/R switch is cancelling gyro values..I will make a video, so all us noobs have a simple and clear answer....I guess people like me need to see whats happening to learn.

Thanks.

[OMGIFLEWIT]

@arbien3

Hi, can you give a detailed description of your dx6i setup for the switches. this will help us newbies with flymentor mode change as you outlined above.

Thanks

Jim

[OMGIFLEWIT]

@arbien3

Hi, could explain the setup of the dx6I for flymentor in a bit more detail please? Maybe a video of it actually being setup on the dx6i would help us newbies?

If not some more detailed instructions would be good.

Thanks

Jim