Paint correction using rotary
Loading...
Loading...
38,293
Link to this comment:
Share to:
Uploader Comments (AffectiontoDetail)
see all
All Comments (13)
-
As its DA it has more of a smeraing action as such, where as the rotary cuts. It's this that gives a sharper finish.
-
i always thought the 3401 give better results cause it also rotates.
-
Both are fine, the 3403 will be harder to use but will give a better finish and faster.
-
what machine i need to polish a car, the 3401 or 3403?
-
Zenith Technique, look it up ;)
It's all in the heat management. Been doing it 9 years, no problems yet :D
Loading...
- 2:28Meguiar's #105 by Rotaryby L200Steve39,624 views
- 7:36Deep Scratch Removal using sand paper and a Rot...by KlayDetailing23,782 views
- 1:41Learning to polishby L200Steve74,453 views
- 9:47Lamborghini Murcielago Detail by detailfinishby detailfinish36,405 views
- 9:16Wetsanding part 3 of 5by MaximusZTS50,097 views
- 6:44Ultra-Cut Compound 105 in Actionby meguiarsasia37,323 views
- 2:47New Meguiar's M105 on Fresh Paint!by meguiarsasia36,456 views
- 6:49Part 2 - How To Pick the Right Car Polisher for...by autogeek19,906 views
- 3:10Machine Polishingby detailfinish49,106 views
- 2:53How to polish a carby ocdetailingva72,675 views
- 3:30Car polishing - Heavy swirl removal with Poorbo...by blkyukon127,016 views
- 2:09Paint restoration Ferrari 355 Spyder Extensive ...by InnovativeDetailing19,122 views
- 9:55Wetsanding part 1 of 5by MaximusZTS106,469 views
- 1:38How to pick up a bead like a pro!by MaximusZTS50,884 views
- 9:25Gloss It Paint Correction System for Cyclo Poli...by glossitvideo15,534 views
- 5:18ULTIMATE CAR CARE BMW M6 2009by Ultimatecarcare12,476 views
- 8:37How Safe is the PC-7424XP? - Part 1by Junkman200041,063 views
- 0:29Farécla "Start Polishing Machine Slowly" Tutorialby FareclaG35,981 views
- 6:43Paint Correction with a Rotary Buffer Part 2 of 2by wahlan9,566 views
no risk when u can get to the edge and not touch,i don't clay cause i don't need to lol,anyways lets agree to differ,ps loving the flocked wheels idea
darkdezigns 2 years ago
How do you get a 6" pad into a corner then without touching the plastic....
I'm gonna come and clay your car one day just to show you :P
AffectiontoDetail 2 years ago
Just to add, these pads don't have a sharp edge so you need the tape to get to the edge safely.
AffectiontoDetail 2 years ago
i remember when i needed to mask trim up
darkdezigns 2 years ago
Well I dont see a point on not doing it, why take the risk? There is no way you can get to the edge properly without it being taped.
Imo its cutting corners over a safety margin and finish. But then you don't clay either....
AffectiontoDetail 2 years ago