250f* If below 250 lean it down if higher than 250 richen it up. It is not easy to get the best reading with the wire on the glow plug because that is where you want to point the temp probe. Point the touchless temp probe straight down onto the glow plug for the best reading. I use a glow plug tool to start mine so I don't have to have the wire in the way.
i've always been told 160 degrees over the outside temp. if its 50 degrees out, just add 160. thats in farenheight (im not sure where youre at)
STINKYbongWATER4207 2 years ago
I have my temps between 210 and 230 that way you get the maximum life out of your engine
RickThePancho007 2 years ago
250f* If below 250 lean it down if higher than 250 richen it up. It is not easy to get the best reading with the wire on the glow plug because that is where you want to point the temp probe. Point the touchless temp probe straight down onto the glow plug for the best reading. I use a glow plug tool to start mine so I don't have to have the wire in the way.
crazy7997 2 years ago
what temp should it be running it at
Joelepp13 2 years ago
yes we are
RcUniverseGuy 2 years ago
u dont need tools unless u break sumthin i think mine cost 400 to 425$
RoBtHeQuAdEr 2 years ago
running a little stupid are we?
RoBtHeQuAdEr 2 years ago
running a little rich are we?
MoRRisoNRisiN 2 years ago
mine was 400 and that was in like o3 so probably expensive
RoBtHeQuAdEr 3 years ago
This comment has received too many negative votes show
your poor
majrascal863 3 years ago