Trex450 motor cuts out
Loading...
Loading...
782
views
Loading...
Link to this comment:
Share to:
Uploader Comments (r6stuntman)
see all
All Comments (2)
-
You are probably getting it too hot with no main rotor installed. What kind of amps are were you pushing?
Loading...
- 9:49
Cheapest Trex 450 helicopter clone HH gyro setup 14by MikeysRC38,519 views
- 9:39
Cheapest Trex 450 helicopter build / setup #9by MikeysRC60,139 views
- 3:49
E-Flite Blade 450 Flyingby joehandsome9942,653 views
- 1:39
Rally Acropolis 2008 Henning's engine cuts outby rallybase675 views
- 1:18
Trex 450 se V2 Motor Problemsby skiweb959 views
- 1:28
Trex 450 wobble woes!by vessel02674 views
- 0:25
Exi 450SE strange servo behavior..by mudball100385 views
- 4:11
Shuttle finmounted camby yeogav823 views
- 0:27
Motor problemby rotodyne621 views
- 3:00
trex450 มทบ11by tt23085454 views
- 1:19
Troubleshooting - engine cuts out or missesby HolleyPerformance2,780 views
- 1:50
Remove Belt Drive Static Problemsby teamaerofever5,230 views
- 1:44
Trex450s kitby vespaboy692000350 views
- 4:02
MY EXI 450 SE V2 CLONE OF THE T-REXby HeliMaster101961 views
- 3:47
Alan Szabo Trex 600 3D Masters 2006by alanszabo225,919 views
- 3:03
Mikey's RC T-Rex 450 Clone Demoby MikeysRC63,022 views
- 0:37
Broke Motorby surveyjosh562 views
- 0:21
TREX450 first attemptby lookyj815 views
- 4:30
Trex450 indoors Leon Lukeby leonluke562 views
- 2:15
Pitch Setup RONDO, T-REX 450by dynai16,942 views
The issue ended up being the tail servo. I was running the Futuba S3114 on the tail and it was too sensetive to the static build up. Unplugged the servo and no more problem. Plug the servo in and remove the tail rotor blades and no problem. Leave the S3114 on with the tail rotor blades and It would cause a complete shut down! I have since replaced it with the Futuba 9257 digital. Not a single issue since.
r6stuntman 3 years ago