Asus P8P67 Boot Problems

The Computer boots up, then immediately powers down and starts up again.

Using i5-2500 sandy bridge and Asus P8P67 mainboard, along with compatibility certified Kingston KVR1333D3N9/2G (4 x 2 GB).

When I reset the computer, the PC starts but does not boot up, when it actually boots, it can take up to 40 seconds until the BIOS beep.

Category:

Science & Technology

Tags:

• Asus
• P8P67
• Boot
• Probleme
• Problems
• Error
• Mainboard
• Sandy
• Bridge

[chazflyz]

For those wondering how to solve the double boot issue for this board, there are 2 things that you can do 1) UEFI BIOS -> go to ‘Advanced’ tab -> go down to ‘APM’, press Enter -> enable the “Power on by PCIe.” function. Then press F10 to save & exit. After save & exit, let the system boot into Windows or other OS, then perform a proper shutdown: Start button -> Shut down 2) Internal PLL Overvoltage = DISABLED .

#2 worked for me. No boot isues since.

[Jinxxed0]

I'm having the same problem but my monitor doesn't even react when it turns on as if it werent connected (but it is). So I can't even go into the bios.

[DBYRNE1984]

did ya fix the problem. Im in the same situation. nothing seems to work.

[ultimateako96]

@Jinxxed0

Tnx for the reply:D I will try to do that! And if it don't work, I am gonna send my board back! :) 

[Jinxxed0]

@ultimateako96 Yeah, my computer is up and running. I had to take out one of the ram sticks and it booted. then i had trouble installing windows. but that was because i was using the 6gb cord instead of the 3gb one.because the drivers werent installed for the 6gb one yet.

it was a major hassle, but now everything is working great. good luck

[ultimateako96]

@Jinxxed0

I have the same problem! Did you find a fix for it? And if you did please let me know! :D

(My hotmail: olsall@hotmail.com)