Griffin Clip Anchor Pulling system

GriffinClip.com

Thanks for looking at the site.
We all know that after the third time of just pull the anchor and we will try to reset it one last time, you are beat and not going to be on your "A" Game if you pull this anchor out of 125 feet of water again.
This is the whole reason for the Griffin Clip

•Pre Connect the clip to your A2 Bouy with a Carabiner.

•Push the Clip over the tight anchored rope in one smooth push

•Start your motors and drive towards the anchor rope at about
1700 RPM keeping the anchor ball and rope on the side of your boat.
It is suggested if you have a Cleat on the "Hip" or center side of your
gunnel, get the rop to there and give it a quick loop around the cleat so
that the rope does not pop over the edge of the hull

• Drive away from the buoy and where the anchor was. This will pull
the anchor straight up off of the bottom

• When you see the bouy "Dip & Pop" that means the chain and anchor
have fully been retrieved Not even enough time to have a sip of that ice
cold Beverage you just got out of the cooler

• Turn the bow toward the anchor rope and idle over there while your
one of your Fantastic Mates brings in the rope until they have the anchor
pulled in the boat

• Take the Griffin Clip in one hand and the rope in the other, push it
back over the single rod in the middle that you just put it over a few
minutes ago and pull it back through

•Always Leave the Griffin Clip Attached to your A1 or A2 Buoy for
future Retrievals, no more moving parts

•RUN & GUN

Category:

People & Blogs

Tags:

• Griffin
• Clip
• Anchor
• Pull
• boat
• water
• easy
• use
• bouy
• buoy
• fishing
• fun
• entertainment

[GradyWhite2007]

Yep...they work!  I have one myself. Saves time and bustin your balls!

[GriffinClip]

Great idea guys, I just ordered 2 because I have heard nothing but great things....

[comicfogle]

They say it works they mean it! I love this thing I just got mine and it makes pulling the anchor easy.