Cleaning and Disassembling Hi-Point Handguns
Loading...
Loading...
13,873
Loading...
Uploader Comments (basshoundusa)
see all
All Comments (105)
-
Good stuff!
-
got it what a bitch my fault i did'nt pay attchon how every thing came off and put on the same way
-
exactly the video was I looking , thank you for your time, I knew what difficult is make it and edit videos, a friend
-
pretty good video however, whenever possible, always clean a barrel through the breech end. other than that, not bad
-
Very helpful thank you for taking the time to show how this is done.
-
Thanks this was alot better then the instructions they gave you.
Loading...
2:54
Hi-Point JHP 45 Modificationby 135yota11,025 views- 0:35
dad & my hipoint 45 watch the painby 26014hg35,380 views
- 4:41
Hi Point .45 JHP after 2,000+ Rds.by fuyingbro10,642 views
- 3:59
HI-POINT C9 CUSTOMIZATION DETAILSby millerusaf8,459 views
- 0:37
World's Greatest News Anchorby kapishViral22,057,205 views
- 11:53
Personalizing Your Gun With Color Fillby guntorturetests12,762 views
- 0:23
Shooting Hi-Point 9 mmby ReportTec14,008 views
- 6:37
Hi Point 45 Pistol - 150 Dollars Of Whoop Assby millerusaf6,510 views
- 1:06
HI-Point JHP 45 Catastrophic Failureby LegendSexy30,516 views
- 2:59
Hi-Point .45 ACP Carbine goes fully Nuclearby cisjohn261614,384 views
- 1:01
Shooting the high point .380by mkaylerz9,310 views
- 5:35
The truth about the Hi point 45 auto according to me.by Jaybird327758,508 views
- 9:54
Hi Point Mods.by kendrickmeadows21,486 views
- 5:18
Shooting Hi-Point JHP .45 ACP 4.15.2011by basshoundusa4,823 views
- 2:06
Jennifer Anistonby Flintchee44,320,104 views
- 1:54
Hi point shoots flawleslyby briggs9187183,248 views
- 9:30
the big nasty beast of a hi pointby TheRGreviews6,225 views
- 0:34
my sons shooting highpoint .45..... 9 years oldby mikedavis567130,695 views
- 6:49
How To Polish A Feed Rampby Dietzeeeee102,265 views
- 4:35
HI Point 45 mag failure *UPDATE*by BIGGxDAWG2105,974 views
i can't get my slide retainer to line up with the pin hole wth
docyoung81 3 days ago
@docyoung81 on my C9, I have to put it in at an angle, because the slide ends up getting in the way of the retainer pin by a little bit.
basshoundusa 2 days ago
Excellent post. Very Helpful. I have the Hipoint 45 and C9. Also I have the 995TS carbine and I LOVE em! Great info on cleaning. I think I need to disassemble and clean mine today. I also think I was over oiling. Thanks again!
ctbobx 1 week ago
@ctbobx Thanks! I want to get one of their carbines. Haven't got to shoot one yet.
basshoundusa 1 week ago
I have a hi-point 9mm with the compensator, I have taken it off the compensator at the end, once i take out the slide retainer pin and move the slide upwards to take it off, the slide doesn't come off, it will not fit over the 1/2 inch barrel that protrudes out, therefore the slide doesn't come off... any ideas as to how to remove the slide over the barrel?
PDT1257 2 weeks ago
@PDT1257 I've never seen the one with the compensator. This is just a guess, but i'm wondering if when you take the slide retainer pin out, lift the back end up as far as it will go, and then remove the slide retainer (part 8) by sliding it out, as it should easily do so since it does not have a pin in it. Then once that's out you probably can drop the slide back down and then push it forward to remove it. Hope this helps!
basshoundusa 2 weeks ago