Sig Rascal 40 RC plane w/OS 46AX mounted sideways...
Loading...
Loading...
251
views
Loading...
Uploaded by FastSundayflyer on Sep 11, 2011
With an OS 46AX mounted sideways. This sets up the exhaust to come straight out the bottom of the plane. There is very little goo to clean up at the end of the flying day.
Uploader Comments (FastSundayflyer)
see all
All Comments (5)
-
What prop ru runnin?
-
been thinking bout buying one of these to add to the collection...great idea on the motor turn. I was actually thinking bout doin it and finally got to see on THANKS
-
nice ! just got me one ! wooohooo!
Loading...
5:59
Sig Rascal 40 Electric Conversionby efly7263,482 views- 2:01
Mark's Sig Rascal Fortyby taurustbolt333 views
- 5:48
hangar 9 rc aerobatic toledoby hmx952,143 views
- 4:13
Maiden Flight Of My Vintage Kit Built Sig Kadet Senior RC Airplaneby EvlMagus832 views
- 1:33
OS 95 AX w/ APC 15-6 prop on my RV-4...by FastSundayflyer241 views
- 0:56
Rc Airplane Strikes Powerline part 2by rocketman4551163 views
- 2:14
Schumacher Rascal - rcuniverse.com reviewby rcunathan18,751 views
- 0:37
Jon lands RC Rascal turbine jetby 9Dutchman9299 views
- 1:19
Sig Lil Rascal @ Buder Parkby Willyman3607 views
- 0:06
Sig Fly-byby johnnyboyhansen683 views
- 2:40
RC Plane - Stevens Aeromodel RV-4by chipko102 views
- 0:09
Sig Rascal Landing problem. Too much lift, it wouldn't come down!by csufuav1,127 views
- 4:01
FPV Flight Compilation - Land - Water - Low - High - RVTW 10by ChrisTechTV4,519 views
- 1:39
R/C CL 415 Maiden Flight at Pattees Pond Float Flyby MeFlyer20,083 views
- 10:05
Hangar 9 P-51 Mustang PTS Mk II with an O.S. 46 AX engine installedby dskeigley2,343 views
- 1:06
40 size RC Piper J-3 Cub Tip Stalls and Almost Crashes & Dead Stick Landingby FBodyexpert6,496 views
- 7:39
Spillway RC Club 9/11/11by graniteslinger26 views
- 2:31
Sig P-51 B with Saito 100 maiden flightby TheDirtyRodriguez218 views
- 6:06
Sig Ninjaby issr7213 views
- 5:39
Sig 1/4 Quarter Scale Piper Cub J-3 R/C Model Airplane Saito Futaba IMAA AMAby HelloScottB26,559 views
If you check the threads on RCU, there are 3 areas that need to be addressed. If you fly it fast like I do then you will need to fiberglass the wing joint. Also add tri stock above the ply wing mount support where the bolts go into the plane. The 3d thing is to add a ply plate in the plane for the landing gear. It is very weak and will pull out in a few landings if you don't, even soft landings!
FastSundayflyer 5 months ago
If you check the threads on RCU, there are 3 areas that need to be addressed. If you fly it fast like I do then you will need to fiberglass the wing joint. Also add tri stock above the ply wing mount support. The 3d thing is to add a ply plate in the plane for the landing gear. It is very weak and will pull out in a few landings if you don't, even soft landings!
FastSundayflyer 5 months ago