Vapor tach hooked up on a x18
Loading...
7,496
Loading...
Uploader Comments (s2wheels)
see all
All Comments (23)
-
hey s2wheels nice bike,and how do you hook the trail tech up,like what part of the engine,and you got a 150cc on there rite so you dont run lights.?
-
hey which model is this,thx
-
hi, how is the speedo powered? thanks
-
where can i get one of those
-
they are about $129.00 for the standard version.
-
How much is that?
-
what engine do you have and what pipe,sound really nice.
-
so whats the correct or proper range to set the rpms for???? PLZ LET ME NOW A.S.A.P!!
Loading...
i have one question so does it mean when you rev it or riding the bike when the yellow or the red ligth appears does that mean you need to shift? PLZ REPLY A.S.A.P
X18cruiser21 2 years ago
It depends on what the rpm range is that you set it up for.
s2wheels 2 years ago
only 9 k rpms???
X7rocks 3 years ago
Hey i wasn't tryin to wring the motor out under no load.Watch the the screen closely you'll see it go up to or pass 1041k on the rpm's.Plus look every time you see the little red light flash that means i rev'ed it to,or pass 10k on the rpm's.My first shift is set @ 8k's then i set my redline shift @10k.Also look at the bottom right half of the screen.You'll see the numbers of the rpm as the engine is running also.
s2wheels 3 years ago
how did u get ur lanps to light when high RPM, and the rmp counter, mines stand att allmost maximum, and jumps up and down :S
rask3n 3 years ago
First thing,to get the lights working.The vapor it tells you in the instructions that you'll need a 12v power source.Then you have 3 settings for the rpm readings mines is set at 0.5 or you can put in the ppr# your motor.
s2wheels 3 years ago