Circuit etching with laser on reprap mendel
Loading...
Loading...
7,594
Loading...
Uploader Comments (MorwenReonarudo)
Top Comments
-
So does this mean the reprap can now produce its own PCBs?
1 year ago 3
see all
All Comments (15)
-
@MorwenReonarudo Thanks for clarifying. That makes more sense and makes me significantly happier about your health!
-
Fap fapfap to that new PCB
-
@glennlopez This is a 445nm 1W laser diode and can be easly fond on eBay
-
thats pretty awesome! what is that laser called and where can i buy it.
Loading...
- 4:40
First Prints on my RepRapby ahmetcemturan9,610 views
- 0:08
X moving at 750 mm/s on Prusa Mendel with caruKlip/Klimentkip firmware accelerationby caru834,037 views
- 1:55
PCB Laser Structuringby LPKFGroup9,336 views
- 2:30
Aluminium Reprap: first print.by thelastnameavailable9,777 views
- 0:49
Reprap Mendel. My first 3D printby evon101014,813 views
- 3:57
Reprap- Day 52 Highly Decent Printsby GeoDroidJohn7,816 views
- 1:07
RepRap Controls Laserby engserve6,658 views
- 4:34
First try to laser etch pcb #1by MorwenReonarudo6,390 views
- 2:38
Optical Laser PCB Printer, WIPby yaywoop3,483 views
- 1:42
Reprap mendel laser engravingby MorwenReonarudo1,213 views
- 1:45
Introduction to Mendel (RepRap v2)by RepRapChannel37,030 views
- 0:31
Printing a Double helix with a Reprap Mendelby zzarbila2,412 views
- 1:57
Laser Cutting Attachment Mendel Reprapby charleshcreed2,569 views
- 3:52
Standard Prusa Mendel Reprap at 184 mm/s with Klimentkip/caruKlip firmwareby caru835,490 views
- 1:06
RepRap Mendel's first printby RepRapChannel10,864 views
- 3:49
RepRap Mendel "Willow" printing in blue PLAby NicholasCLewisGmail5,902 views
- 0:29
PCB board Laser Etch readingby PacificiD1,703 views
- 2:25
3D Printer in Action - Making Me in a RepRap 3D Printerby netfabb6,902 views
- 1:00
My RepRap 3D printer printing itself an upgrade (Bowden extruder clip)by Erikdb63,729 views
- 0:50
Cutting a circuit board for a RepRap Extruderby jztechguy841 views
Vaporized copper fumes == extraordinarily toxic. I love this, but unless there's a vac running that can handle metal fumes (falling water scrubbing) this is a very risky proposition.
rossbagley 3 weeks ago
@rossbagley This does not etch the copper! it Etches the paint so it can be used as a mask once you put the board into the acid. The only danger here is the laser itself, if you try this please use proper laser safety glasses.
MorwenReonarudo 3 weeks ago
If you move the laser up close to the workpeice, wouldn't that be much more effective than doing it so far away?
zzzzbest 5 months ago
@zzzzbest It was easier to control the focus point at that distance and didn't get the fumes on the lens.
MorwenReonarudo 5 months ago
What type of laser did you use? Where can I buy it?
ehsanpro 5 months ago
@ehsanpro Its a 1w blue laser please check the blog for more details.
MorwenReonarudo 5 months ago