Idle air control issue?

This only happens on a cold motor it runs rough when given throttle but if you let it idle for 30 seconds or a minute it will never show up what happens in tis video..

in a nutshell on a cold motor after starting and trying to move forward or backwards the engine kind of stumbles to make it's away above 2K rpms.. after it reaches that it's fine and no other issues until it cools or sits overnight and you want to leave again.

the car stalls because the engine was not coming up to speed relative to how far I was pressing down on the throttle and letting the clutch out.

Category:

Autos & Vehicles

Tags:

• Subaru
• cars
• IAC
• EJ22
• Legacy

[sportsaddict1942]

Locate and clean your idle control valve...clean inside of the area where it goes then wipe down with a clean rag....let it sit for 30 minutes then start...If still running rough replace it.....Best bet get a pro to run a scan with a computer to find exact problem.

[RBpowered240]

a just wanted to know if it was your iac because my sentra is doing the exact samething as soon as i want to step on the gas it sounds louder but only gets all the power until around 2k rpm and as soon as i slow down it wants to turn off and sometimes it does