TMAXX 3.3 (MODEL 4907)
Uploader Comments (tmaxxcojack)
All Comments (14)
-
Lsn second. (read first comment i left)
-
Just lean ur high end needle a bit thats pretty much set. Now go down to ur hsn and lean out just a bit also prolly just one time 1/8 and maybe once more 1/16. It should have good ecel and MAKE SURE u always see smoke of the start a a tad a high speed if not richen up ur hsn a bit. And for ur lsn do the pinch test it should idle for about 2sec(fine lean tuning) not recomended unless u racin. And between 3 to 4.5 sec to be good. To much seconds just lean ur lsn 1/16. Remember always hsn first ls
-
@OMGitsMichael123 thanks
-
@hamoon007 it has a rubber seal in the cap..check it, if its bad get a new 1, or replace the tank
-
my revo tank leaks from the cap what should i do
-
Upside-down it will run till the fuel has ran thru the line
-
Also I don't think I heard it shift gears
-
The car may stall when u flip it depending on how long its on its side. Also if its too rich it may stall idling
@101erydndat5 it shifts gears but i have noticed that its not consistent. it'll change on a decent stretch but my yard is too tight for me to get up to speed safely with out hitting something. (stalling while flipped) ok cool. i thought it was suppose to continue running
tmaxxcojack 9 months ago
@onecjwilly @101erdndat5 Thanks...i'll make adjustments on my next day out. The car isn't suppose to stall while idling right? it also stalls when it flips over. should i lean my low end to solve the stalling issue?
tmaxxcojack 9 months ago