Xbox 360 X Clamp fix - Part2 - How to fit the x-clamp kit
Loading...
Link to this comment:
Uploader Comments (xclampfix)
All Comments (55)
-
@xclampfix hi im bmxbooster on a different account, i bought a heat gun did followed your tutorials, and my xbox now works, so thanks alot i subscribed :)
-
@vkumar2695 they should squeeze down to make pressure against the board and hold the heatsinks down thru the many cycles of hot and cold.
-
@xclampfix alright and are they suppose to align back into place when i screw them on?
-
@bmxbooster usually the x-clamp fix works for 3 red light errors. e74 is sometimes the GPU in which case this would fix it and other times it's the ANA chip (above the GPU so you'd need to heatgun (just look at my video on that on my channel) and after that fit an x-clamp kit.
-
@vkumar2695 m5 spring washers or split washers as some call them
-
is this for 3 red lights or e74 1 red light?
8:52XBOX 360 Repair Guide - #3 Installing the X-Cla...by Xbox360Fix642,015 views
- 11:12NEW Xbox FIX 2011! Repair Red Lights of DEATH!by GamerGuy5193,927 views
- 8:49X Clamp Fix - RROD Repair Guide Part 2: Removin...by xclampkit6,369 views
- 13:07XBOX 360 3 Red Ring Fix (EASY)by fluiditystudio32,962 views
- 9:14Xbox 360 Heat Gun Fix (the Pro way) for Red Rin...by xclampfix73,570 views
- 1:20Xbox 360 Goes Crazy After Penny Fixby mniko8959,351 views
- 11:54XClamp Fix January 2011by RobbieHct32,402 views
- 1:11OVERVIEW: 3 RedLights XBOX 360 X CLAMP Repair K...by ThreeRedLightFix27,439 views
- 0:59How to fix ANY Red Ring of Deathby slipmad64,217 views
- 22:49Extreme Hybrid X-Clamp Repair Tutorial For Xbox...by amoeller7,161 views
- 0:52how to fix xbox 360 error 73by LashandaBerr7,512 views
- 9:47XBOX 360 The new Ring of death fix. Fry it!by afterxleep68,471 views
- 1:04Xbox 360 E 74 Fix (100% To Work!)by teambig18128,649 views
- 9:06XBox 360 GPU permanent reflowby Logoseum67,642 views
- 3:37XBOX 360 Fix 3 Red Lights Ring of Death Pro Rep...by orinnum3r094,522 views
- 8:57PART 3: ARCTIC SILVER 5 ARCTICLEAN CPU THERMAL ...by ThreeRedLightFix32,920 views
- 7:23How To Repair XBox 360 - Simple Long Term Fixby TripAcesFull187,983 views
- 7:00Xbox 360 X Clamp fix - Part1 - How to open an X...by xclampfix59,498 views
- 4:34X-clamp-Fix in only 4 Minutes by www.x-clamp-fi...by wwwxclampfixcom1,351,369 views
Okay so I did all of this and after I turned my Xbox on and it didn't have the red rings but it still froze at start up and it sounded like the fan was getting louder. What do I do? Could the Xbox just be done with and should I buy a new one?
joshwadey209 1 week ago
@joshwadey209 Sounds like it's close to working. I would loosen the bolts and then overheat for 5 mins with the fans unplugged and then cool 20 mins before tightening the bolts up and seeing if that sorts it. If not it may need a heatgun fix to get it properly working (see the vid on my channel).
xclampfix 5 days ago
So I need 8 bolts 8 spring washers and 16 flat washers and artic thermal paste? Can you tell me the sizes of the bolts and washers please
joshwadey209 1 week ago
@joshwadey209 m5 everything - so m5 bolts (10mm long), m5 washers (1.05mm thick) and m5 spring washers. I avoid Arctic 5 as it's too thick to spread to the edges of the chip - works well on CPU heat spreaders but direct on to a chip not so good so better to use a more fluid type of paste like the Antec silicone compound in this vid.
xclampfix 5 days ago