Learn how to shingle your storage shed roof properly to avoid damage from the elements and to have a great looking outdoor shed. The experts from Lowe's and Heartland walk you through shingling your roof, step-by-step.
Start with a smooth even roof. Begin by cutting a piece of roofing felt a little bit longer than your roof. Begin at the lower edge of the roof, nailing the roof felt to the panels. Then cut the felt flush with the roof. Install the next layer of felt by overlapping the first layer by 3 inches. At the roof peak, let the felt overlap to the other side. Install felt on the other side the same way.
To install the drip edge, begin at the corner with the drip edge flush to the front trim. Attach the drip edge by using roofing nails. At the bends, use tin snips to cut the bottom flange and bend the drip edge over.
Install a starter row of shingles across the lower edge of the roof. Put these on with the rain slots upward. Leave a 1 inch overhang. Use 4 nails per shingle and don't nail above the sealing strip. At the back, let the shingles overhang; they will be trimmed later.
For the first row, line up the notch on the first shingle with the drip edge and the lower edge, flush to the starter row. Install the first row all the way to the back of the storage shed. Stagger your shingles by installing the second row with the first shingle flush to the drip edge.
At the bend in the roof, shingles should extend 3-4 inches over the bend, with the rain slot over the bend. At the peak, make sure there is 5 inches or less from the peak to the rain slot. Now trim the last row of shingles to the peak with a utility knife.
Cut shingles with a slight angle on the end with no color. Start at the front of the roof. Start with the first piece with the color side flush with the shingles. Nail near the sealing strip. Overlap pieces so 5 inches of the previous piece shows.
If you shingle correctly, your outdoor storage shed will look great for years to come.
Find the perfect outdoor shed or backyard storage unit at http://www.Lowes.com/Heartland
Find out how to lay the foundation for your storage shed: http://www.youtube.com/watch?v=YPri5N04nKk
obrigado, era exatamente este tipo de ajuda que estava precisando.
brjbo2 5 days ago
His face is priceless at 4:08
brennen90 3 weeks ago
Excellent video, help me a lot.Thank you very much.I gif you 5 stars
elpuri99 2 months ago
That is definitely excellent video.
dumpstersforsale 2 months ago
very helpful five stars
TheKatsuki15 3 months ago
nice job
roofingshingles 3 months ago
Hey Renee, your not moving fast enough. Ha ha.
Gregsok 3 months ago
Rly great movie
roofrepairhq 3 months ago
What I have is a very small A-framed chicken coop. It's built on a 4x8 sheet of plywood with an A-frame roof. Peak is probably 4' 6" high.
HarlieJ 3 months ago
On that style of shed, drip edge on the bottom would have been the most important. The front and back arent going to have any run off on this type of shed. So thats wrong, second at the end you have see many exposed nails on the curve of the roof (need to be sealed with silicone or tar). and ice and rain shield is usually common practice on any roof now a days.
brade07 3 months ago