Hard Cutting English Wheel
Loading...
Link to this comment:
Uploader Comments (jajackdaniels)
All Comments (17)
-
@Lengsel7 I'm ignorant of the process, but I was wondering the same thing. Could it have something to do with the affecting the hardness of the metal being machine? Frankly, I don't have a clue; but I'm amazed what a skilled metal workers can do with an English Wheeling Machine or any metal forming equipment.
Roy Lewis
Atlanta, Georgia USA
-
Forgive my ignorance.What is an "english wheel"?
-
@jajackdaniels I was doing some lathe work and had a chip land on my eye lid and burn in...and yes i had my glasses on lol..
they get very hot but cool just as quick
-
you do excellent work! how can I get one of these wheels from you? Do you make the other wheels that go with this one? thx
plz let me know.
-
thanks,mate. you do me great favor! I'll try the speed rate tomorrow. we use meters. so 600 SFM, .0035ipr is about 180 meters and 0.9 feed rate. Hope the knife won't wear too fast.
10:01
How to Build A Model A Fender part 2by performancemotors90,029 views- 3:51
Creating half a sphereby LenapeFireTurtle52,632 views
- 8:01
Bead Roller & English Wheel Comboby courtjester9013,166 views
- 5:05
English Wheels 101by TrickTools58,414 views
- 2:44
Metal With Graceby carbuildergirl33,144 views
- 1:50
Aeroform using the English wheelby the1kelly14,394 views
- 1:58
Custom Build Welding the Rear Fender - Road Rage Performance Custom Choppers & Motorcyclesby RoadRagePerformance27,680 views
- 0:12
Rolling a fender partby willysgaser48,451 views
- 5:40
Industrial Fan Inlet Cone Halifax Fan, Centrifugal fanby HalifaxFanTV133,640 views
- 67 videosjordan maxwel
- 9:59
English Wheels 201by TrickTools104,556 views
- 6:06
custom gas tankby kinessisPit39,806 views
- 5:19
the art of metal spinningby metalspinningworksho303,922 views
- 10:06
TANKAR Builds an English Wheel (part two) - East Side Choppersby TANKAR18,633 views
- 4:47
Building of the English Wheelby JourneymanSailing9,464 views
- 3:30
ENGLISH WHEEL - Benchtop Model introby tinmantech18,973 views
- 2:30
CNC Machining: Seco CBNby Purloise3816,380 views
- 1:05
English wheel on the roof of the gtx1by carbuildergirl17,960 views
- 8:23
METAL SHAPING WITH HAND TOOLS (English craftsman)by mindover3220,801 views
- 5:06
Lazze Metal Shaping: Stainless Steel Panel in the Bead Rollerby lazzemetalshaping55,542 views
- 0:25
Wheelingby willysgaser15,841 views
New Shop Phone Number is 260-301-9034
Thanks Everyone.
jajackdaniels 6 months ago
what type of steel do you guys use? i want to built an english wheel and the engineering firm over the road from me just used cast iron wheels?
sshhrroooomm 1 year ago
@sshhrroooomm
I use 4140 Annealed. After I rough Machine it leaving about .01 (ten thousandths) on all Surfaces. This Wheel is 52-54 hrc.
My Shop Information is
Hoosier Profiles
260-246-5754
jajackdaniels 1 year ago
hi, may i ask you what kind of knive you use? do you use diamend knife? I'm machining whit same hardness steel, H13, HRC 50~52. But problem is it take too much time! The working piece is 300mm in dia, 300mm tall.
What's your feed rate, speed and cut depth? I only cut 0.1mm, and speed 80m. i really need to ruduce the machining time.
thanks.
dioiao 2 years ago
Greetings Dioiao,
The Tool is Ceramic, Diamonds are nice but they can fail very easily. The Wheel is turning at 600 SFM, and the feedrate is no more than .0035 ipr.
jajackdaniels 2 years ago
Nice cuts...I love hard turning like this. We use english wheels all the time, but I didn't know they were that hard.
wccti 2 years ago
Not all are Hardened, to my knowledge we are the only ones making them. We do wheels for most everyone.
jajackdaniels 2 years ago