Alert icon
We're changing our privacy policy. This stuff matters.  Learn more  Dismiss

street b16a2 turbo civic 20psi vs skyline r32

Loading...

Sign in or sign up now!
Alert icon
Upgrade to the latest Flash Player for improved playback performance. Upgrade now or more info.
6,954
Loading...
Alert icon
Sign in or sign up now!
Alert icon

Uploaded by on Sep 19, 2009

wilowbank drags 16th sep 09

A bit of friendly competition at the local drags

Turbo Civic - full weight, 300whp, B16a, 20psi, gt2871r, pump fuel, Forged Pistons/Rods, stock sleeves, 22inch MT slicks

R32 skyline - 450whp, RB25, nitto DR (hoping for 10's)

civic put together by Hi-Power Racing on Moss street.

Category:

Autos & Vehicles

Tags:

License:

Standard YouTube License

  • likes, 0 dislikes

Link to this comment:

Share to:

Uploader Comments (Scholzey)

  • that civic must be running pretty lean if it's only making 3oo whp at 20 psi on a b16. It should be making around 350 unless you got lower compression pistons... What did you do to the transmission/mounts/axles/tire­s to get launches like that in a fwd honda?

  • @samsamsamsamsamaaaaa

    hey mate, dont look at the power its makeing. comparing from different dynos and places tell different stories. if you look at my mph at the end of the track its around 123mph which in american land is probably about 400whp or so.

    the car is tuned to about 11.5-12:1 AFR under boost on 98 octane. i have about 8.5:1 compression pistons.

    stock b16a transmission with quaife LSD.

    my engine mounts are hasport. not the hardest ones, but with street friendly inserts.

  • @samsamsamsamsamaaaaa

    axles are driveshaft shop 2.9 axles, but only one is installed because the other had a manufacture fault, so its running one stock axle.

    clutch is soft for the power, only rated at 80% above stock torque it says, but its worked perfectly and easy to launch. to launch i bounce on the launch control for a sec or so then slide the clutch till the wheels match the speed of the limiter then let off fully on the clutch. seems to hook like crazy.

  • @samsamsamsamsamaaaaa tyres were 22in M/H slicks on 15 in wheels. i had skinnys on the back.

    have to change into 5th gear with those slicks so they are too small, 24.5 would be about perfect i think

    sorry read posts from bottom to top lol

  • nah my mate just filmed cars he knew, that was all the footage that was taken that night

see all

All Comments (11)

Sign In or Sign Up now to post a comment!
  • @samsamsamsamsamaaaaa wow 50 less thats wouldnt be to diffrent it would just spin more

  • that's crazy my type r turbo was making 290whp on 8 psi with a ebay t3t4 and log mani

  • @Scholzey that's good and reliable power!! a pal of mine had a b16 with the stock pistons running 15 psi on e85. He made 340 whp until the head gasket gave out after a year or so of boosting. He didn't believe he could run 11's, but if I drove his car, ohhh maaann!!! id be spinnin through 3rd.

  • That yellow skyline needs to work on his launches haha but its nuts none the less! Doing my first run at willowbank this year :D

  • wow, NO turbo lag with that gt2871r!! Ball-bearings FTW!

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more