Adams Polishes: Cleaning your equipment(DVD Volume 5)

This shows you how to clean your Adams Polishes equipment after all the work is done.

(Transcription)
--------------

First things first, your microfiber applicator pad. Now the all purpose cleaner, is an outstanding tool for cleaning these pads out. Heres what I'm going to do, before I get it wet at all go ahead and spray the all purpose cleaner into the pad directly, if you use both sides then both sides, then take the pad and rub it like so and then rinse. So you can see how clean the all purpose cleaner and the hose program gets the microfiber applicator pads. Next we're going to go with the tire sponges. Spray the all purpose cleaner into the sponge, get it all nice and deep down into the sponge, then rinse the same way we did the applicators, you'll see all the dirt fall out of the sponge, you can see the tire sponge is also cleaned up rather well. Last I'm going to show you how to clean the buffing pads. Once again all purpose cleaner. Spray one side, spray the other side, I'm going to work the cleaner into the pad and then (spray) one side, and the other side. Squeeze out all of the water, and then set to dry. So, these are all three very easily cleanable. Now, a quick note cleaning your microfiber polishing towels and microfiber drying towels.
Do not wash microfiber with any other technology, dont wash them with your terry clothe towels or anything all the lints in the terry clothe will get all over the towels.
Fabric softener is a huge no no, dont use fabric softner it messes up things bad.
You can bleach them with a little bit of bleach not much.
And only use liquid soap.
---------------

Category:

People & Blogs

Tags:

• Ferrari
• 355
• Adam
• Pitale
• Polishes
• Adamspolishes
• Chevy

[tr101]

yeah... and of course he rests all of his equipment on the ground so it can pick up dirt and debrees. thanks for the perfectly scratched clear coat