Motorcycle and ATV Cylinder Hone Instructions - Flex-Hone

http://www.rockymountainatv.com - Learn how to hone your own motorcycle or atv cylinder using the Flex-hone from Rocky Mountain ATV/MC. Why pay a shop when you can do it yourself?

Category:

Autos & Vehicles

Tags:

• motorcycle
• atv
• hone
• flex-hone
• bore
• top
• end
• rebuild
• repair
• piston
• cylinder
• honda
• yamaha
• pastrana

[greenmonster687]

is the flex hone aluminum oxide ? if so what grit?

[RockyMountainATVMC]

@greenmonster687 - 320 silicone carbide. Aluminum oxide works great too on nikasil. i worked directly with the manufacturer to get the best one for motorcycles and atv's, and the 320 silicone carbide is what they suggested.

[dh4life100]

ow much do you think this would cost to have done?

[RockyMountainATVMC]

@dh4life100 - it just depends on the shop

[171apples171]

do you carry this flexhone for KZ1000 street bikes?

[RockyMountainATVMC]

@171apples171 - Yes we do, even though it isn't listed in our specs. It depends on your bore size. Your KZ should be around 72mm. Please double check and refer to the following part list. 68-70mm hone part # is 1284240005, 71-73mm is 1284240016, 74-76mm is 1284240006.

[BowHunt1229]

@youlikeguys1 WD-40

[BowHunt1229]

stroke it quickly.

[youlikeguys1]

i'm sorry after reading previous comments i figured out you just used a wd-40 type oil

[youlikeguys1]

what kind of oil did you coat it with to prevent oxidation????