MXR Noise Clamp: James

MXR M195 Noise Clamp
Crank your stomp pedals to the extremes without the fear of any hiss or excess noise with the MXR Noise Clamp. By sensing your guitar's dry signal, The Noise Clamp reduces the noise level within the effect loop, coming down hard on even the noisiest signals. A single Trigger knob allows you to set the volume threshold at which the pedal is active, and a green LED shows whether the gate is on/off. This bad boy is capable of reducing Noise up to 26dB, maintaining riff definition at extreme gain levels.

Rotating the Trigger knob clockwise raises the Noise Clamp's volume threshold for hard clamping, while rotating it counterclockwise lowers its volume threshold to let through quieter notes.

**LOOP BYPASS OPTION
Internal switch toggles between two bypass modes: Loop Bypass or Loop On. When in Loop Bypass mode, the Send/Return effects loop is bypassed when the pedal is off. In Loop On mode, the Send/Return effects loop is active while the pedal is off. This can be accessed by removing the back plate of the pedal.

Signal chain: James+SG+T Fuzz+Noise Clamp+AC30

Produced & Directed by Joey Tosi
Performed by Jamed DePrato
Art Direction by Graham Shaw
Sound Engineering by Max Baloian
Music Direction by Bryan Kehoe
Cinematography by Donavan Sell & Danny Nieder

jimdunlop.com

Category:

Music

Tags:

• mxr
• m195
• noise
• clamp
• gate
• 195
• pedal
• guitar
• effect
• effects
• jim
• dunlop
• boutique
• gibson
• joey
• tosi
• max
• baloian
• bryan
• kehoe
• donavan
• sell
• danny
• nieder
• graham
• shaw
• james
• deprato
• hiss
• fuzz
• trigger

[swanky23]

Great noise gate. Even better fuzz. I want the fuzz now, not so much the gate.

[spudvader86]

The fuzz pedal is Called a T-fuzz by T-Pedals, an Italian company. The pedals are all hand made and they cost 215 euro...if u can find them.

[gaulifogg]

when i saw this thing, i thought, sexy ass lookin' pedal. then, i heard the fuzz's noise. lastly, i heard the noise clap do its thing. I now want this pedal so bad.

[NetjerTa]

This work for a bass?

[kiyablues]

where connect the compressor ?, before the loop, or in the loop with the overdrive '

[joanesinu]

@matt21randyrhoads All the pedals connect in the noise clamp by send and return and the guitar is connected in input/output. The reason is because noise clamp process all the signal (All the pedals you have) and puts in your guitar.

PD: Sorry English isn't my language.

[matt21randyrhoads]

Quick question, help is appreciated. Where do all of the cables go to/ come from with this pedal? It looks like the input comes from the guitar, return goes to the overdrive, and how do the other two come into play?

[harveydents]

fucking awesome!

[brandenconker]

BEAUTIFUL Pedal :') <3

[asashesrain]

@pauljack20 smart gate is ment to shut amps up, noise clamp is to shut pedals up

[Ombrenuit]

Does the job. Don't think you can find a noise gate that doesn't effect the tone somewhat. If you can, let me know!

[ilmorozovz]

Very strongly cuts frequencies...