GoldWing 36% Sbach342 V3
WingSpan: 107"
finished weight 26.5lb (dry)
here is my setup:
engine: DLE-111 (V1 old carb)
2x 60mm canisters
50:1 mixture synthetic oil
Carbon fiber 27x10 prob (hobbyKing)
Servos:
4X hitec 7954sh on ailerons (running on 2cell lipo 7.4V)
2X hitec 7954sh on rudder (running on 2cell lipo 7.4V)
2x fitech FS-5414 (213 oz/inch on 6V) on elevators
2x 2200mah lipo 2 cell batteries (backup of each other feeding receivers and ignition).
2x FrSky 2.4mhz receivers on board (one running on 6V through UBEC; another running on 7.4V straight from batteries)
Futaba 9ch radio
hi sir can you show me pls the exact cg of this plane thank you
0713edwin 1 month ago
@0713edwin It is where the wing tube is. that works for all GoldWing planes.
YT1344 1 month ago
Awesome plane and great flying. Any chance of some specs on the running gear eg. type of prop and size, servo's and so on. Great vid.
Keep up the graet work
Regards
baehawk2709 6 months ago
@baehawk2709 Thank you very much for your interest and comment. :) I updated video's description so you can find all the info there.
cheers
YT1344 6 months ago