Edale flexographic label printing press

An old , Single colour Edale flexographic printing press printing labels at StarLoc adhesives, we have 2 of these machines and use them to make return address labels (as were not very good at operating them we havent done anything more complex!)
The machine runs a lot faster than this, its just that running flat out the registration onto precut labels starts to slip (as im not very good at setting it up!)
Does anyone have a copy of a manual for them ....

Category:

Science & Technology

Tags:

• Edale
• printing
• press
• label
• over
• printer
• overprinter
• flexo
• starloc
• adhesives

[wgrhglshp]

the cylnder and the indexer are linked by chain,there is a drive cam under the index cam,i have various cams,reduced diamiter for some of the way around, most are 180 degrees of 1mm lower than the rest, the cams give different ranges of size,the bottom disk pushes up, the top cam is adjustable to the bottom cam,round a bit one way or the other,the cams touch at different times to alter the position exactly of the cams and label indexing

[printermaniac]

printer service manuals: refillbros com manuals

[wgrhglshp]

@biff1935 , this has been cleaned.......

[biff1935]

only prints on pre cut labels

Oil it and clean it!!!

[Mrspcatering]

what is the cost of the machine.santiago

[Mrspcatering]

Quiro imprimir papel en tiras para maquinas registradoras y etiquetas autoadhesivas.tengo una maquina para cortar papel en tirars quisiera informacion sobre la maquina para adhesivar e imprimir a uno y dos colores

[Mrspcatering]

i wish to make adhesive labels with paper strips.i have a sliter paper for strips.

i want to print and adhesibe.

please send me information of the machine ry for una color.

or two.

and to print only paper stripsfor cashier for stores.

[smethious]

I dont understand how its intermittant feed and the web moves and then stops like that ,, normally flexo is non stop, rotary...you must not have a rotary die , you must have a flat-bed die.. its looks like a really old flexo press, kinda outdated