Trailer Hitch Installation - 1996 Chevrolet 1500 - etrailer.com

Loading...

Sign in or sign up now!
Alert icon
Upgrade to the latest Flash Player for improved playback performance. Upgrade now or more info.
560 views
Loading...
Alert icon
Sign in or sign up now!
Alert icon

Uploaded by on Aug 12, 2009

http://www.etrailer.com/tv-Hitch-Install-1996-Chevy-1500.aspx

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
Today we are going to show you part number 75099 from Draw-Tite. We are going to install this on a 1996 Chevrolet pickup 1500 with an 8-foot bed. All right, the first thing we need to do on our install here is, we need to remove this bolt here, and the hitch will reinstall at this attachment here and also this hole right here, and the one back here, also. This one we will run a 1/2 inch bit through just to clean it out and dig out some of the rust and stuff, but basically it is really a no-drill application. We will go ahead and run the drill bit right through here just to clean it out. And maybe you will have to do this on yours or not, but it is always a good idea. And we will go ahead and remove this bolt and the same thing for the other side. OK, we will go ahead and install the hardware. The plate and the bolt go right here and another one goes through this hole right here. And go ahead and repeat it for the other side.

Next, we can go ahead and install the hitch. On this one, it is kind of heavy so it is always a good idea to have an extra set of hands. You might have to push some hardware back in, so let us take some time out to fix that. Then go ahead and install the fasteners for the bolts going toward the front of the vehicle. And you definitely want to leave them loose. And we have the holes at the rear of the vehicle to install the bolts. OK, last we can get the bolts at the end of the frame. Just go ahead and thread those back in. You may have to clean it out and loosen the hitch a little bit to give some wiggle room to get those bolts in. At this point you can go ahead and snug them down, and then we will give them their final torque. All right, that covers our install of part number 75099 from Draw-Tite on a 1996 Chevrolet pickup 1500 with an 8-foot bed.

  • likes, 0 dislikes

Link to this comment:

Share to:
see all

All Comments (0)

Sign In or Sign Up now to post a comment!
Loading...

Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more