Soldering SMD SSOP-28
Loading...
Link to this comment:
Uploader Comments (thelastnameavailable)
Top Comments
-
Easier said than done.
I've been soldering for 40 years and can't do these by hand -- even with smallest tip and smallest guage.
SSOP sucks.
3 years ago 3
-
No, you are! :p
4 years ago 2
All Comments (26)
-
I tried this method and guess what......
-
This isn't really the way to do it. Take a look at some of the videos produced by professional trainers. These get soldered all at once in less than 1 min.
-
Dude, awesome job, yesterday i was soldering FT232 and that was nightmare ;)
-
coincido con Rafaslim
con un poco de flux, mitad de tiempo y mejor...
-
Trabajo de mono, usa flux y suelda los pines del tirón.
-
Altium Protel DXP is a common software program to do it ;). You will have to sit through a few hours of video tutorials on how to use i tho
-
I tried soldering an SSOP chip today and really screwed it up. Where do you get that ultra-fine solder from? I got a 1mm thick solder and it kept coming off in globules which were hard to control. Ended up throwing everything away in rage.
-
Don't drink a pot of coffee prior to mounting one of those chips. ;-)
-
is too Complication , using the solding toal(Knife type) no need to solder each pin , the hold process can finish 20 second. if you want i can teach you how to do it easy way
- 3:20Professional SMT Soldering: Hand Soldering Te...by jkgamm041164,948 views
- 2:50Soldando SMD'sby xzakox54,193 views
- 9:59Soldering 101by allandrick272,799 views
- 0:37Professional Surface Mount Soldering - How To: ...by jkgamm04147,254 views
- 4:19SMD solderingby ellioncham19,026 views
- 2:30Aluminium Reprap: first print.by thelastnameavailable9,198 views
- 0:24Drag solderingby circuittechnology38,394 views
- 3:28Hand Soldering a .5mm QFP Chip With SchmartBoar...by nealgb109,608 views
- 0:16Soldering a 32-pin TQFP ATmega8by sparkfun54,657 views
- 8:55Soldering Tutorialby irvinplecter140,174 views
- 8:55SMT soldering HQby KD1JV33,395 views
- 4:46How to Do It: Basic Solderingby coldrestart832,601 views
- 1:36Soldering SMD 0805 Capacitorby thelastnameavailable185,559 views
- 4:40Lead-Free SOIC 20 Installation | B.E.S.T Corpor...by SolderingGeek34,487 views
- 4:01SSOP-28焊接.wmvby lxc10141,833 views
- 0:23Solder SMD Diodeby sparkfun29,197 views
- 3:59TSOP32 Installation Multi-lead | BEST, Inc.by SolderingGeek35,214 views
- 4:02Lead-Free Multi Lead Soldering | Soldering Tips...by SolderingGeek155,828 views
- 1:57Solder a 100-pin LQFP SMD-ICby WatterottElectronic56,364 views
Dude I am totally working on a project with the same chip. Ive never soldered ssop and the project has 2. How easy is it to fry the chip? whats the best temp for the iron? Thanks
TravisFlepper 3 years ago
Don't worry about frying the chip. If you spend more than a couple of minutes soldering take a break and let it cool down. The best way I think for this chip is to use a large tip and solder all the pins without worrying about bridging the pins. Then use some desoldering braid to remove excess solder. The temperature depends on your solder I think I use 600-700F for 60/40 and 700+ for Pb free solder.
thelastnameavailable 3 years ago
This is the wrong example on how to solder IC. We Hong Kong People can solider this type of Ic in 1 min.
Solidering pin by pin is the most stupid approach.
He should apply a patch of solder and drag across the pin quickly.
macmacwing 4 years ago
Thanks for your comment. Please post a video. I also use your method of using flux and simply dragging a ball/pool of solder across the pins.
thelastnameavailable 4 years ago