Piaget EPP Hobby City Plane
Loading...
11,775
Loading...
Uploader Comments (jeffmcclain)
see all
All Comments (12)
-
What is the plane total weight and witch set are you using?
-
I am planning to buy one of those. Is it hard to fly because it's "flat"? That would be my 5th plane, so is it worth buying? I have previous experience of flying gas powered 3d planes.
-
he means that as you took off and uped the throttle there was a clicking sound, the motor sticking ?
-
nice flying , i will buy one from hobbycity too
do u think Turnigy 3020 Brushless Outrunner Motor 1200kv from hobbycity will be better?
also should i get gws 8x4 dd or rd ?
Loading...
Nope. If you've flown before, and have the basic movements down, you'll probably find this one of the easiest planes to fly and learn. It floats very slow and 3D foamies are some of my funnest planes.
jeffmcclain 1 year ago
nice flying. i have somting to ask you,whan you throw the plane out and posh full Throttle the motor stuck like fyou seconds i have the same problem dont know what to do.
nigga9292 2 years ago
Hum. I'm not sure I understand what you are asking? You have a hesitation in the motor? I don't have that same issue, so...
jeffmcclain 2 years ago
Maybe you're talking about the "chatter" that happens with full throttle and the plane is at a stall? That is 100% the prop cavitating and pulling the prop-saver band. I have a prop that doesn't fit the prop saver real great, and the o-ring isn't quite strong enough to handle a 3S lipo at full charge at full throttle. Hope that answers your question?
jeffmcclain 2 years ago
Nice. is this a good f3p plane?
ThurDude 2 years ago
eh....not really. It is probably just a little on the heavy side. there are much better/lighter planes out there for only $20 more that would be better for F3P.
jeffmcclain 2 years ago