2n3055 flyback transformer tutorial/guide

http://www.instructables.com/id/2n3055-flyback-transformer-driver-for-beginners/

Simple diagram http://farm7.static.flickr.com/6051/6329378577_754a48287b_b.jpg

If the circuit does not work straight away try reversing the primary and feedback winding connections.

Since making this video I have learnt that a fast diode to protect the transistor is a MUST as back EMF can easily kill the transistor without it. The easy to find UF4007 is suitable for this.

Sorry the tutorial is not very good and I do not like speaking on camera.

Category:

Howto & Style

Tags:

• 2n3055
• tutoriel
• transformer
• flyback
• high
• voltage
• how to
• connect flyback transformer
• line output transformer

[Jhfgsjdcd]

Yo thanks it worked , i was trying the highr winding higher voltage but i was limited on power i am using two six volt lantern batteries were do u buy 12v in the u.s

[Alex1M6]

@Jhfgsjdcd Ok. I am not sure if you can buy 12v lantern battery's but two 6v lantern in series is 12v which will work the same. I used a 12v lead acid battery for mine and I got it pretty cheaply at a local battery specialist shop. It might be worth asking at a local scrap yard as they will usually give you them for free or next to nothing.

Also do upload a video of yours arcing at some point.

[Jhfgsjdcd]

Yo i got the arc but i disconected connected and no arc

[Alex1M6]

@Jhfgsjdcd Sounds like there is a poor connection somewhere. If you used enamelled magnet wire for the coils then I would advise you to use a sharp knife and scrape off any excess enamel you might have missed.

Solder is the preferred way to make wire connections as it will not come loose.

[Jhfgsjdcd]

Sorry using ipod i cant i tried it but still no outpuy

[Alex1M6]

@Jhfgsjdcd Well when you get to a computer click the link as it is an instructable guide with all steps easily explained, plus there are some trouble shooting steps near the end of it.

[brandon14872]

@Jhfgsjdcd on amazon they have 12 volt lantern batterys.

[high1voltage1rules]

Alex it me blackmesa25. I had to delete my account. Got sick of peaple sending me bad comments. Hope ya well.

[Jhfgsjdcd]

I am stupid. I think i fucked my transformer up . What i did is i got a mains transformer a stepdown, made a fullbridge rectifier it was 12 3 amps not sure wat happened but my primes started smoking then i tried rigging it up but i got nothing .did i burn it out?

[Alex1M6]

@Jhfgsjdcd Did you click on the instructables link?