How to remove and installation of SKI DOO TRA primary clutch
Loading...
Loading...
21,665
Loading...
Link to this comment:
Share to:
Uploader Comments (gixxer1000100)
see all
All Comments (9)
-
@BustedGT1 what do you tighten the secondary clutch down too? ft-lbs? not one person on youtube has that? thanks
-
Tighten with hand tools, it will pop off. It will get tight, just use some grease on the threads.
-
Really you should never hit anything to do with the motor with a hammer, I agree with the hand tools idea.
-
@squamishriverjet at 36 seconds you see him take out the bolt, then at 44 you see him with another black bolt. The second bolt is the tool used to remove the clutch. You thread it in and it puts pressure on the crank shaft which seperates the clutch from the crank.
-
but you didn't show us how to take it off
Loading...
- 9:37
XP- QRS installation & Maintenance video - PT2by mxzxRevzone16,095 views
- 7:45
Clutch Kit Maintenance Pt.1by mxzxRevzone102,567 views
- 0:49
clutch removal problemby alxyz13,826 views
- 9:53
how to change clutch , replacement by Dmitryby loosangeles200,072 views
- 5:52
Cavitacionby albertodelest67,690,138 views
- 3:23
Changing the snowmobile clutchby greasemonkey34810,370 views
- 3:35
Quick Clickers tech tipby sledshot15,890 views
- 2:15
How To Pull a Snowmobile Primary Clutch (Remove aby Beaxch12,796 views
- 5:02
Cleaning Power Valvesby Bkboatnsleds11,185 views
- 5:42
How to make a skidoo xp secondary clutch spring compressor part 2.wmvby thedooryder5,149 views
- 0:24
Rev 800 Clutch Kit, Dynamo Joeby mxzxRevzone14,303 views
- 9:48
XP- QRS installation & Maintenance video - PT3by mxzxRevzone16,204 views
- 0:54
ski doo loud clutch problemby Pispimotto2,712 views
- 1:57
Cluch problemby joshuasames198136,514 views
- 0:33
Changing A Snowmobile Beltby MrVintageCat15,394 views
- 2:22
Rotax 800HO haveri!by Mongomaniac9,735 views
- 0:32
Arctic Cat Drive Belt Installationby Beaxch5,990 views
- 1:46
NO BRA?!?!by N3rdGurl1018,508,275 views
- 0:11
2002 Ski Doo Summitby 02skidoosummit70012,860 views
- 3:08
Clutch Start Tech Tipby sledshot24,196 views
shits weak...
NOTE please people don't use an impact on the clutch, hand tools only, and 70 ft-lbs and to tighten it up. Weak video man at least add the correct info if your going to post stuff like this.
BustedGT1 8 months ago
@BustedGT1 That is how I have done it for years and never had a problem yet...some people don't have the proper tools so I posted this to show another way of doing it.My next one I will show the proper way step by step and explain this one a little better.
gixxer1000100 6 months ago