Add Memory to Laptop - HP Compaq NC6000

Tutorial on how to add Memory to a Laptop - HP Compaq NC6000.

This information is to be used at your own risk. See our Terms and Conditions for more information.

Copyright © 2006 MovieDemo.com.
All rights reserved. Reproduction in whole or in part in any form or in any medium without express written permission of MovieDemo.com is prohibited.

Category:

Howto & Style

Tags:

• Add
• Memory
• Laptop
• HP
• Compaq
• NC6000
• MovieDemo.com
• Tutorial
• How
• to

[etraderbanker]

Very helpful tutorial. I would have been lost without it. Thanks!

[MovieDemocom]

Glad it was of help

[edgriff2000]

thanks for the great video.... I had thought that the PC was one of those who had the panel on the back, and there looked like there was on there, but it was too small. I was about to RMA the memory back to the vendor when I discovered your demo..........what a live saver...........Thanks for the great work

[MovieDemocom]

glad it helped.

[megatronicgoatee]

Hi

Is this the same sort of opening method i would need to put a wireless card inside?

[MovieDemocom]

It depends on your laptop. If it is the same model as this one, I do not believe there is an internal slot for a wireless card. What I use to connect to the internet/network with that laptop is a Wireless PCMCIA Network Card. It simply slide in a slot usually found on the side of almost all laptops. (very easy install)

[bjha92]

compaq owns:P

[TTSSURESHOT]

@sexylilthug77 I had the same problem until, I left 1 of the original rams installed. Just as the video shows.

[sexylilthug77]

Hi I just tried putting an extra 1gb in my nc6000 and it wont have it

[SuperScorp2010]

you are a diamond very very helpfull

[Alessandra30121994]

is my same notebook ! xD

[mbreslin1954]

Thanks for the video, it was a life-saver while working on a friend's nc6000! By the way, if there is a wireless card, as in the one I'm working on, it will be a under a panel on the bottom that looks like a memory panel.

[justtisha]

thanks alot :) just used it to get the keyboard off. it wasn't too lengthy and helped me get right to where i needed to get

[lostinspace771]

I have just bought one of these, they are old BUT heres how to make it much faster:

Solder two pins on ICS chip ->this increases board from 100FSB to 133FSB. Upgrade processor to 1.8GHz. It will now run at 2.4GHz and is comparable to entry level dual-cores!!!

[larsjohanssonblank]

Exactly what I was looking for :-)

[CalenoStyle]

Thank you!!!! nice video!!!

[dan88claudiu]

thank you