Gyro Behavior
Loading...
Loading...
3:39
HH vs rate Gyroby tribologist42,999 views- 0:42
Blade 400 Paint Jobby genettico17,788 views
- 3:21
Always buy good blades.by besthobbie4,327 views
- 1:08
Blade 400 3D 3 weeks onby Smudgyeboy2,440 views
- 7:32
Blade 400 canopy mount upgradeby Nader7032,436 views
- 0:19
Two Yaks crash in midair.by fatboy66612366,954 views
- 6:03
Gimble Lock - Explainedby videodumper69,403 views
- 5:33
E-Flite Blade 400 HeliArtist MD 500 Camo Test Flightby saitoking9,782 views
- 1:34
Blade 400 First Flightby Struggler011,202 views
- 6:59
Blade 400 Trex Aluminum Head Conversionby evildomain10,283 views
- 7:36
blade 400 gym flyingby captksmh1,257 views
- 5:26
B400 - 2nd Flightby puma18242,114 views
- 11:40
Blade SR setup with KDS Flymentor settings explanation (item was sold)by RcHelicopter64858 views
- 6:38
Blade 400 3d Pitch Gauge 101by sokal1146,301 views
- 2:59
Blade SR Hauptrotorby RCSchwob1,286 views
- 5:01
A little Blade 400 Flyingby skigolfmike732 views
- 3:21
blade 400 new piro rate with new gyroby againnotreallyme598 views
- 2:08
Vyaas explaining in ignition - Gyroscopeby boneclinkz12629 views
- 6:16
Honey Bee King 3 Testing New Esky Mini Gyroby alishanmao18,728 views
- 2:31
Why Creationists Deny Scientific Evidenceby FFreeThinker70,936 views
Ive just got me a Blade 400, and ive set it up as per everything you've said. However, im having a problem with the HH. In flight, its wandering to, say the left, and ill give it one move on trim to counter, then it slowly creeps to the right.
I cant get it to hold true. Any suggestions please?
Btw, you do a great job of these vids
CaptainCarling 8 months ago
Go back and read SOKAL's comment again. HH mode won't center sitting on a table. It's working as expected - at least with locked rotation. Get it in the air and HH will be just fine.
pcanddc 1 year ago
EXACTLY! finally someone who genuinely knows the electronics of a blade 400 and not just name dropping on buy this and buy that because some other guy said it was better!!! Thanks man!!!
Jduc750 2 years ago
GET A FUTABA RADIO
gmax876 2 years ago
Assuming you dont have any strange settings on your TX like uneven travel adjust I would say it's a combination of the usual crap eflite gyro & servo problems. Replace your gyro with a futaba GY401, your tail servo with a reasonable quality one like a Hitec HS56 & mount the tail servo on the boom like a trex & you will find the bulk of the problems will vanish. I did the same thing on my blade & it solved the same issues.
trexranger1 2 years ago
that would be normal for both settings
in rate mode the servo will center rate mode being les then 50% in gyro gain
and in Heading hold mode it wont center due to the fact is sitting on a table and it isnt sensing and yaw movment HH mode is anything above 50%
sokal11 3 years ago