Prolux DC 4.8 - 6V AUTO GLOW IGNITOR With INDICATOR

Attention to detail is what sets apart the amateurs from the "pros".
No need to carve up your cowl to access the plug!
This nifty little gadget eliminates the need for external glow igniters of any kind with an on-board system that will supply 20 seconds of glow at the push of a button.
SPECIFICATIONS :
•L.E.D. indicator light when "glow is active"
•4.8-6.0V POWER REGULATOR
•Sustained ignition for 20 seconds
•Pulse transfer system, low current and low dissipation
•Spring loaded connector design grips the glow plug tight
•Weight - 30g
•the choice of power connection either via a spare rx channel or a separate battery installed in the model

Category:

Sports

Tags:

• Onboard
• Glow
• ingnition
• system
• for
• Radio
• Control
• aircraft.
• PL2205

[bathroom34]

where do u buy it?

[ModelEnginesAus]

@minititan100 Installation is really simple. A cap goes over the top of your glo plug, then the power lead can go into a spare channel of your Rx or you can wire it to a separate power supply. The housing for the switch and indicator light can be mounted wherever you find it suitable on the model you are fitting it to and the earth wire is usually attached to the engine mount. It really is that easy!